It is a specialized equipment used in the clothing and dyeing industries for pre-treatment and post-treatment to remove stains during the washing and finishing process of clothing. Can effectively improve the effectiveness and efficiency of clothing washing and tidying. The INJECTOR-99 pneumatic stain remover uses compressed air, specialized stain remover, and clean water, combined with vacuum dehumidification, to effectively remove stubborn dirt on clothing before washing or during finishing. The pneumatic spray stain remover is widely used in the laundry service industry, clothing manufacturing industry, and other light industries. It is characterized by fast stain removal, strong stain removal ability, and cost saving (the amount of stain remover can be controlled). INJECTOR-99 Pneumatic Cleaning Gun Technical Parameters: Effective Spray Distance: 30~150mm Spray Nozzle Z Diameter: 0.6mm Rated Pressure: 0.4~0.7Mpa Spray Quantity: 0~120ml/min Maximum Fog Amplitude: Φ 5~Φ 50mm Compressed Air Interface: Φ 6mm. Stain remover interface: Φ 6mm, external dimensions: 135X80X22mm. Operation of INJECTOR-99 pneumatic spray stain removal gun: place the clothes to be stain removed flat on the surface of the stain removal table, ironing table or the working surface of the rocker arm, while stepping down the foot, start the fan to pump away the decontaminated residual liquid, hold the corresponding pneumatic spray stain removal gun for decontamination in your hand, gently press the gun machine, and the gun machine will open from gear 1 to gear 2. The stain removal liquid will spray out from small to large with the compressed air (open the gun machine as required), that is, spray inward along the periphery of the stain, and the stain will become shallow and clean from deep, and then use clean water pneumatically The spray stain removal gun shall be cleaned again according to the above method to remove residual dirt. Of course, if necessary, the air level of the stain remover gun can be used to remove moisture and achieve quick drying effect (level 1 of the gun is the air level, level 2 is the stain remover level).