1WTW dissolved oxygen electrodeDetailed Introduction

（1）StirrOxG electrode

Self stirring dissolved oxygen electrode, while stirring for testing!!

1. One step operation in placeEasy to achieve multiple rapid tests;

2. Traffic * ensures good reproducibility;

3. Can be tested immediately without polarization;

4. Low oxygen consumption, only 0.008ug h-1 (mg/l)-1；

5. No zero drift, no need to calibrate zero point;

6. Standard equipment OxiCal®-ST storage calibration kit;

7. Long service cycle,One time filling of electrolyte is available6 months;

8. IMT temperature compensation，belt2 temperature probes;

9. Film perforation monitoring can indicate film damage.

（2）Cellox 325

Galvanic dissolved oxygen electrode

1. Test immediately without polarization;

2. No zero drift, no need to calibrate zero point;

3. Standard wire length 1.5rice，IP67 connector;

4. Standard equipment OxiCal ®- SL storage calibration kit;

5. Long service cycle,One time filling of electrolyte is available6 months;

6. IMT temperature compensation，belt2 temperature probes;

7. There are also different electrode wire lengths to choose from;

8. Optional mixer RZ300.

（3）DurOx 325

Galvanic dissolved oxygen electrode

DurOx 325 Storage calibration kit SK-D

1. Test immediately without polarization;

2. IMT temperature compensation,belt2 temperature probes;

3. Long service cycle,One time filling of electrolyte is available6 months;

4. Low flow rate requirement;

5. No zero drift, no need to calibrate zero point;

6. Waterproof (IP 68-2 bar);

7. Line length 3Mi, standard waterproof plug（IP 67）；

8. Standard equipment OxiCal ®- D storage calibration kit;

9. Standard protective cover SK-D.

IICellox 325 dissolved oxygen electrodeofPurchase Guide

(1) Electrode selection

(2) Selection of electrode accessories

Cellox 325 dissolved oxygen electrode