Carbolite AZ eight zone tubular furnace

1、 Product Introduction:

The Carbolite AZ tube furnace has 8 temperature control zones to achieve the desired temperature throughout the entire heating length.

There are 8 temperature control zones, with thick insulation materials and symmetrically distributed heating elements, resulting in temperature uniformity performance better than ± 5 ° C. Its main advantage is that it has 8 independent temperature control zones, which allows the temperature equalization zone to be extended. In addition, temperature control can be very precise, achieving linear heating, peak or other temperature fields. The typical application of AZ tube furnace is chemical vapor deposition. Chemical vapor deposition requires a temperature gradient, where the material vaporizes at the higher temperature end and cools down at the lower temperature end to deposit on a substrate layer. All temperature control zones are independently controlled and monitored by individual thermocouples.

2、 Standard parameters:

1. Same structure as FHA/FHC tube furnace

2. 8-zone temperature control to meet the needs of different temperature fields

3. Within the heating range, a temperature gradient can be formed, with linear heating/cooling

4. Expand the length of the average temperature zone

5. Rapid heating and cooling

6. Fully automatic operation

7. Data recording for quality management

8. Set value relay temperature control method

3、 Optional accessories:

1. Provide a range of precision digital controllers, multi-stage programming, and data recorders, which can be equipped with RS232, RS485, or Ethernet communication interfaces

2. Over temperature protection (recommended for protecting valuable samples or unattended operations)

3. Various sizes and materials of work tubes are available, such as quartz, ceramic, and metal

4. L-shaped bracket, used vertically

5. Thermal insulation plugs and radiation shielding plugs prevent heat loss and improve temperature uniformity

6. More information on controllable atmosphere and vacuum components

7. The vacuum system can be equipped with either a mechanical pump or a turbo molecular pump, with a working tube inner diameter of 60mm or more

8. According to requirements, Siemens SPS controller, touch screen, and mass flow meter can be selected

9. For other specifications of work tubes and heating lengths, please consult us

4、 Technical parameters: