The CLT+A type four cylinder cyclone dust collector is suitable for dry non fiber dust with a high specific gravity, and is commonly used in industries such as smelting, casting, sandblasting, building materials, and refractory materials. The cylinder and volute of a single cyclone dust collector can be designed in two forms: right-handed and left-handed.

The CLT+A type four cylinder cyclone dust collector is a vertical cyclone centrifugal dust collector. It consists of an intake pipe, a cylinder, an exhaust pipe, a volute (or collection cap), a cone, an ash hopper, and other parts. The difference in structure from a general cyclone dust collector is that the axis of the inlet pipe of a general cyclone dust collector is perpendicular to the axis of the cyclone tube, while the structural feature of a CLT/A type cyclone tube is a tilted inlet pipe, with the axis of the air pipe tilted at an angle of 15 degrees from the horizontal. Due to the inclined air inlet and spiral top cover guide plate, the defect of reducing dust removal efficiency when the flue gas of ordinary cyclone dust collectors enters the dust collector and rotates downward, some of the flue gas also rotates upward to form a vortex airflow. This airflow rotates downward around the wall of the outlet inner pipe (exhaust pipe) and mixes into the purified flue gas at the inlet of the exhaust pipe, which is discharged from the dust collector with the exhaust pipe and reduces the dust removal efficiency. Application: Suitable for metal recycling in polishing and grinding, dust treatment in furniture factories, and collection of dust with larger particle size and higher density.

The CLT+A type four cylinder cyclone dust collector is a basic type cyclone dust collector and belongs to the spiral type cyclone dust collector. The top cover plate is made into a downward sloping 15O spiral tangent shape. After the dust containing gas enters the dust collector, it flows downward along the direction of the sloping top cover without forming an upper dust ring. This can eliminate the small vortex airflow caused by the introduction of airflow, reduce kinetic energy consumption, and improve dust removal efficiency. This dust collector is suitable for high-density, dry, non fiber dust removal and is widely used in industries such as metallurgy, casting, sandblasting, building materials, electricity, and refractory.

The CLT+A type four cylinder cyclone dust collector is composed of three parts: a cyclone simplified body, an ash hopper, and a volute (or collection hood). According to the number of simplified Chinese characters, there are five combinations: single tube, double tube, triple tube, quadruple tube, and triple tube. Each combination has two types of air outlet: Type I horizontal air outlet and Type II upper air outlet. For Type I twin tube combinations, there are two types of combinations: center inlet and outlet air and side inlet and outlet air. Type I single tube and triple tube combinations only have side inlet and outlet air, while four tube and six tube combinations only have center inlet and outlet air. For various combinations of Type II, any of the above Type I inlet positions can be used. This dust removal equipment has the advantages of low resistance, high dust removal efficiency, large processing air volume, stable performance, small footprint, simple structure, practicality and low cost, and is suitable for dust purification in various mechanical processing, metallurgical building materials, and mining industries.

Advantages and characteristics of CLT+A type four cylinder cyclone dust collector:

1. The CLT+A type four cylinder cyclone dust collector has a simple structure, no moving power components on the body, no need for special auxiliary equipment, small footprint, and low manufacturing and installation investment.

2. Easy to operate and maintain, moderate pressure loss, low power consumption, and low operating and maintenance costs.

3. The operation has great flexibility, stable performance, and is not limited by the concentration or temperature of dusty gases. There are no special requirements for the physical properties of dust.

The CLT+A type four cylinder cyclone dust collector has a simple structure, is easy to manufacture, install, and maintain, and has low equipment investment and operating costs. It has been widely used to separate solid and liquid particles from airflow, or to separate solid particles in the industry. Under normal operating conditions, the centrifugal force acting on particles is 5-2500 times that of gravity, so the efficiency of CLT+A type four cylinder cyclone dust collector is significantly higher than that of gravity settling chamber. Mostly used for removal. For particles larger than 3 μ m, the parallel multi tube cyclone dust collector device also has a dust removal efficiency of 80-85% for particles larger than 3 μ m. The CLT/A type cyclone dust collector constructed with special metal or ceramic materials for selection, corrosion, and clothing can operate under conditions of temperature up to 1000 ℃ and pressure up to 500 × 105Pa.