BAW typeStainless steel sanitary centrifugal pumpproduct overview

BAW stainless steel sanitary gradecentrifugal pumpBelonging to single suction, single-stage, centrifugal typesanitary pumpSuitable for conveying various liquids such as milk, beverages, and alcohol, it is an indispensable conveying equipment in industries such as food, chemical, and pharmaceutical. The highest temperature absorbed is around 80 º C. Among them, high lift pumps are particularly suitable for applications in systems with high resistance such as tubular sterilization, yogurt holding equipment, CIP cleaning, etc.

BAW typeStainless steel sanitary centrifugal pumpProduct characteristics

This series of pumps mainly consists of a pump body, a pump seat, and an electric motor. Each part is connected by bolts. The support feet under the bottom plate can be adjusted freely for easy installation, without the need for a fixed installation foundation. During installation, the outlet pipe can be installed vertically or horizontally according to different needs.

This series of pumps is designed with a smooth transition, rigid structure, and thick wall design. In the selection of materials, all parts that come into contact with the material, such as the pump body, pump cover, impeller, etc., are made of AISI316 or AISI304 stainless steel. The mechanical shaft seal is customized with high-quality stainless steel and silicon carbide. Greatly improved wear resistance and moisturizing properties, extending the service life. The motor adopts the internationally renowned "ABB" motor, with a protection level of IP55. F insulation and a wide voltage structure. During production, the pump body and impeller are precision cast as a whole, and all parts are surface treated. Special fixtures are used to ensure dimensional clearance during installation. The shaft seal adopts an open structure, so even if there is a small leakage at the shaft seal, it can be observed in a timely manner. Even if not detected in a short period of time, it will not overflow into the motor. This ensures the service life of the electric motor.

This series of pumps is finely crafted and not prone to scaling, making it particularly suitable for CIP cleaning.

This series of pumps has a simple structure, easy disassembly, low noise, high efficiency, smooth and gentle material processing, meets food hygiene requirements, and ensures the original flavor of the product.

BAW typeStainless steel sanitary centrifugal pumpinstructions

Centrifugalsanitary pumpIt is best to position the pump below the suction liquid level during installation (if the pump is installed above the suction liquid level, a tank pump should be used before starting the pump). Before use, check whether the rotation direction of the impeller is correct; Is the nut of the pump inlet and outlet pipe joint tightened; The sealing ring between the pump cover and the pump body is well padded. Steam disinfection should be applied to the parts in contact with materials before use to ensure food hygiene.
A butterfly valve should be installed at the outlet of the pump to control the flow rate. Do not operate under overload conditions for a long time to avoid damaging the motor.
The pump should be immediately cleaned with CIP after use to prevent material adhesion. If CIP is not available, manual cleaning is required. When cleaning, hot water can be used first, then disassembled, and all parts of the pump that come into contact with the material can be brushed with a brush. Then rinse with clean water and install them in order.
If material is found dripping on the ground behind the pump casing during use, it indicates a leakage at the shaft seal. At this point, the mechanical seal device on the shaft can be checked. If it is severely worn or the seal is damaged, it should be replaced or ground before use.

BAW typeStainless steel sanitary centrifugal pumpperformance parameter

Kaimei Pump Industry Co., Ltdsanitary pumpSelection Notice

1Stainless steel sanitary centrifugal pumpProduct name and model,Stainless steel sanitary centrifugal pumpPipeline diameter,Stainless steel sanitary centrifugal pumpUsing head (m),Stainless steel sanitary centrifugal pumpMotor power (KW),Stainless steel sanitary centrifugal pumpMotor speed (r/min),Stainless steel sanitary centrifugal pumpVoltage [V],Stainless steel sanitary centrifugal pumpThe suction range used (m),Stainless steel sanitary centrifugal pumpName, specific gravity, viscosity, corrosiveness, and toxicity of the medium used
2、 If our company has already been selected by the design unitStainless steel sanitary centrifugal pumpModel, please pressStainless steel sanitary centrifugal pumpOrder the model directly from the marketing department of Kaimei Pump Industry Company.
3、 Please provide detailed product usage requirements as much as possible to ensure the correctness of our selection and improve the maximum efficiency of use.
Thank you for visiting the website of Kaimei Pump Industry【http//www.kmb58.com】If you have any questions You can call our company's marketing department, and we will do everything with care.

Pay attention to details and quality, Kaimei water pump