rule grid

inside Rong

Hot air circulation drying oven TSTC-58L

An pretend use ruler inch

studio dimensions

4200×4200×4500mm(Depth x width x height refers to the height from the plane of the car to the top of the oven interior)

Overall dimensionsabout

4420*wide4560+Control cabinet width 230*tall5180+Motor height 270mm(Width x Depth x Height)

Chassis load-bearing capacity

Channel steel feet, No. 12 I-beam track, extending to the outside of the box10rice

Internal storage rack in the studio:

use10No. channel steel systemOne flatbed carThe car can bear weight8T.The car is made of channel steel.

Lord want skill technique ginseng number

On site environmental conditions

temperature5-40℃ Relative humidity: not greater than85% Suitable for indoor use

There is no strong vibration or airflow around No corrosive gases or chemicals present Non drying flammable and explosive materials

Equipment Composition

Composed of furnace body, hot air circulation system, electric heating system, intake and exhaust system, circuit control system, etc

electricity source

3N+PE 380V 50Hz

Temperature range for use

Room temperature~250℃ (adjustable arbitrarily)

temperature control accuracy

≤±1℃;

heating power

158.4kw(divided)4 sets of heating）

thickness of insulation layer

100mm左右

stove body be unify knot constitute

structural form

Adopting a monolithic structure.Concentrated placement.

Opening method

Front of furnace bodydoubleOpen the door.(The door lock adopts chrome plated sheep horn handle and steel hinge)

Furnace shell

Q235After rust prevention treatment, cold-rolled steel plates are sprayed with acrylic self drying paint

Furnace inner liner

stainless steel inner pot

Shell skeleton

Q235Rust removal and rust prevention treatment for channel steel and angle steel

Inner liner skeleton

Q235After rust removal and rust prevention treatment of angle steel, spray coatingW61Series of silicone heat-resistant paint

bottom plate

Q235After rust removal and rust prevention treatment of channel steel, spray coating851Moisture resistant coating.

thermal insulation material

Low thermal conductivity, high-quality high-temperature resistant aluminum silicate cotton

sealing material

Asbestos sealing strip sealing

drum wind be unify

air supply mode

Studio hot air supply method: horizontal strong pressure horizontal air supply on both sides simultaneously

blower motor

High temperature resistant long shaft motor specifically designed for curing furnaces, with a noise level of65dBbelow

Blast power

1400 revolutions,1100W×8Platform, equipped8a12Inch impeller.

Installation position of motor

Set at the top of the furnace body

plus hot be unify

Heater position

Inside the air ducts on both sides

electric heater

UThe font safe low load stainless steel electric heating tube is of reliable quality,3.3KW*48Support.

enter\\\\exhaust system

intake valve

Top fan base air inlet8A diameter of 60MM

exhaust valve

A manual exhaust valve is installed in front of the top2A diameter200MM (adjustable according to the required displacement). The supplier shall reserve flange interfaces and provide external exhaust pipes according to the actual situation in the workshop.install additionally550WExhaust fan, timed control.

electricity control be unify

control manufacture cabinet

Adopting an independent control cabinet for control, the surface of the control cabinet is treated with spraying and painting. There is a control box on the left.

Temperature control device:

Digital display intelligent instrument XGQ-A2300FAutomatic temperature control, constant temperature and beltPIDAdjust. Control accuracy ±1℃.

Time setting device:

HS48S-99.99 timing device, with a maximum adjustable time of 9999H during actual setting. It can be manually/automatically switched on and off. The timer starts when the temperature reaches the set temperature, and the heating power is cut off when the constant temperature time is over. The fan does not stop rotating, helping to dissipate heat inside the box.

electrical components

Adopting domestic and foreign famous brands, such as Chint, Omron, etc

heating control

Suzhou Integrated ElectronicsSSRSolid state relays have contactless power regulation and use input stages with optoelectronic isolation,

TTLLevel compatible input, DC or pulse triggered, with no contacts and no mechanical moving parts,

No sparks, no movement noise, vibration resistance, long lifespan and other characteristics.

guarantee

protect

be

unify

match

place

●Automatically cut off the heating power supply.

●Overtemperature protection: When the specified temperature is exceeded, the buzzer will sound an alarm, the heating will be cut off, and the fan will not stop rotating to help dissipate heat inside the box.

● Motor and heating interlock control Start with the blower before heating to prevent the heater from burning out and causing accidents.

● Motor overload protection Prevent the motor from burning out and tripping.

● Short circuit protection for electric heaters Prevent electric heaters from short circuiting and burning out

● Control circuit protection Prevent short circuits in the circuit and prevent accidents

● circuit breaker Prevent overload and short circuit of the main circuit, which may cause accidents

● Power prevention after power outage Prevent damage to baked goods caused by increased baking time after power on

solid transform stove Appendix document and its it say bright

Yan color

Computer gray white

random file

Instruction Manual1copy/Taiwan Various instrument manuals1set/Taiwan