Product features:

Installation dimension preview table for TRC-V square linear guide rail in the middle assembly:

Linear slides are mainly used in mechanical structures with high precision requirements. The moving and fixed components of TBI slides do not require an intermediate medium, but instead use rolling steel balls. Because rolling steel balls are suitable for high-speed motion, have low friction coefficients, and high sensitivity, they meet the working requirements of moving parts such as tool holders and drag plates in machine tools. If the force acting on the steel ball is too large and the steel ball is subjected to preloading for too long, the resistance to the movement of the bracket will increase. When placing an order for linear slides, please make sure to pair and select according to the needs of the machine equipment to meet the operational requirements of the machine equipment.

Precautions for using Guangdong TBI linear slide rail
Take:
(1) The slider and slide rail may fall down due to their own weight after tilting, please be careful.
(2) Knocking or dropping the slide rail, even if there is no visible damage, may cause functional loss and unstable operation. Therefore, please handle with care.
(3) Do not disassemble the slider or slide rail by yourself. Due to lack of professionalism or carelessness, the steel ball may slip off or foreign objects may enter the slider, which may affect assembly accuracy and service life.
Lubrication:
(1) Taiwan TBI linear slides are wiped with rust proof oil before leaving the factory. After secondary processing, the rust proof oil needs to be wiped again and then injected with lubricating oil or grease before use.
(2) Do not mix lubricating oils or greases with different properties or compositions.
(3) When using lubricating oil for lubrication treatment, different installation methods will have different lubrication methods. Usually, lubricating oil (or grease) is injected into the installation hole of the slider, and then the slider moves back and forth on the slide rail several times to evenly apply the lubricating oil or grease to any part of the product.
use:
(1) The usage environment should not exceed 80 ℃, and the instantaneous temperature should be controlled within 100 ℃. To extend the service life, please do not exceed 100 ℃.
(2) Used in special environments, such as frequent vibration, high dust, high and low temperatures, and humidity This work environment requires periodic maintenance to ensure the accuracy of product usage and extend its service life. During maintenance, it is necessary to pay attention to whether the product is worn out. If there is wear, please replace it in a timely manner to avoid causing greater losses.
deposit:
When storing linear slides, please wipe anti rust oil on the slides and slides, package and seal them properly, keep them horizontal as much as possible, and avoid high and low temperatures and severe lake moisture. Do not place them directly on the ground.