| Keywords: antenna feeder lightning arrester, wireless signal lightning arrester, high-frequency signal lightning arrester, GPS signal lightning arrester, microwave signal lightning arrester |
| The antenna feeder series coaxial communication signal surge protector is designed and manufactured according to IEC and GB standards, using unique surge energy absorption and interception technology. It has extremely strong lightning surge protection capability, with a maximum discharge current of 20kA (8/20 μ s) and a frequency range of 0-6000MHz. It is suitable for communication signal surge protection of wireless communication equipment. The interface form of the product is BNC/TNC/L16/SL16 male and female connectors, or other wireless high-frequency connectors, which are easy to install and maintain. |
|
| Surge protection for wireless high-frequency communication signal lines |
Frequency range: 0-6GHz |
| Multiple interface forms are available for selection |
Maximum discharge current 20kA (8/20 μ s) |
| Low micro insertion loss |
fast response |
|
| Product performance parameters: |
| model |
CX-AIR6000 |
| interface type |
N |
| Interface standard |
FM/FF |
| Maximum allowable power |
300W |
| Nominal discharge current In (8/20 μ s) |
10KA |
| Maximum discharge current Imax (8/20 μ s) |
20KA |
| Protection level Up (1.2/50 μ s) |
<> |
| Characteristic impedance |
50Ω |
| standing-wave ratio |
<> |
| insertion loss |
＜0.2dB |
| Frequency range |
0–6GHz |
| Failure indication |
Short circuit or disconnection of the line to ground |
| Ambient Temperature |
-40/85oC |
| Installation method |
series connection |
| Housing material |
stainless steel |
| enclosure ratings |
IP65 |
| *1. Antenna feeder products can be customized with other wireless high-frequency interfaces as needed; |
| 2. The product parameters are subject to the actual product manual. |
|
| Product scope of application: |
- Wireless transmission of network signals and protection of interface equipment;
- Protection of wireless transmission and reception equipment for industrial control signals;
- Protection of wireless transmission and reception equipment for control signals;
- Protection of satellite TV receiving equipment;
- Protection of other wireless communication devices;
- Protection of other RF signal equipment.
|
|
| Product size and installation diagram: |
 |
|
| Schematic diagram of common types of antenna feeder interfaces: |
 |
|
