XY-MCAmmonia liquid concentration detectorapplication
Automatic alcohol concentration ratio in biopharmaceutical industry
Continuous monitoring of processes such as organic industrial alcohol, ammonia water, ethanol, etc
Daily moisture analysis in the laboratory
Monitoring of slurry and slurry concentration during mining process
Monitoring and analysis of moisture content in food industry slurries and emulsions
Online alcohol concentration meter
XY-MCammonialiquidConcentration detectorcharacteristic
The measurement range is large and can be applied to 0 Range from 1 to 100%
Widely applicable and suitable for testing the concentration of polar to non-polar substances
Fast response speed, signal response time<5s,
The detection structure is easy to adjust
Double temperature compensation is applied to the instrument for higher accuracy.
Durable and sturdy, not prone to scaling, adhesion, or blockage
The material compatibility selectivity is large, and the test value can be seen in 2-5 seconds
Pollution caused by volatile gases during distillation
No additional fees for consumables
Low energy consumption; DC12V charger; 9V rechargeable battery
XY-MCammonialiquidConcentration detectorTechnical Parameter
Measurement principle |
The principle of microwave energy attenuation caused by absorption when passing through matter |
|
Measurement object |
Organic compounds such as alcohol, ammonia water, mineral slurry, emulsion, etc |
|
resolution |
0.1% |
|
Measurement range |
0.1%~100%; Ammonia water: can reach |
To saturation state |
Indication error |
±0.5% |
|
stability |
Zero drift less than 0.1% within 24 hours |
|
Measurement time |
2s. Professional regulations require taking the average, and the function of recording data and then averaging can be used to meet the requirements |
|
repeatability |
Less than 2% within 24 hours (refer to the repeatability calculation formula) |
|
monitor |
16x2 LCD liquid crystal display |
|
Instrument operating temperature (optional) |
-20℃ - 55℃ -10℃ -60℃ 0℃ -80℃ |
|
Moisture content scale value |
0.01% |
|
Working pressure |
Less than 0.6MPa |
|
power supply |
12VDC or 24VDC |
|
signalling |
Standard (4-20) mA |
|
Communication transmission |
RS232 serial port or RS485 |
|
According to the installation method |
Customization upon customer request (flange, chuck, pipeline) |
|
Insertion depth |
100 millimeters (standard); customizable |
|
Application requirements |
The mixing of materials must be uniform* |
|
size |
530X290X370mm |
|
total weight |
7.0kg |