dry foghumidifier
steamdry fogThe product is a new high-performance aerosol humidification spray device developed and produced by Shanghai Shifu Company.
|
1.dry fogThe principle of humidifier The humidification system operates based on the principle of vacuum siphon, generating ultrafine mist from a two-stage atomization system. In a two-stage atomization system, the gas water mixture is sprayed from the central hole to achieve the first atomization; Then mix it completely with the gas coming out from the nearby nozzle to achieve the second atomization. Adjust the compression ratio of water and air as required to obtain * good spray effect; Spray particle size: 6.8 μ m-8.5 μ m 2.Characteristics of humidification system Compact, but with better humidification performance, lighter weight, shorter overall length, and superior performance compared to similar products. The visually soft appearance, exquisite design, and intricate and circular design avoid disrupting indoor harmony. |
![]() |
|
energy conservation The consumption of compressed air is only equivalent to that of similar nozzles in China60%More energy-efficient and environmentally friendly. System Characteristics 1. Good atomization effect, special vacuum valve design, compressed air negative pressure induced humidification. 2. Automatic control system to better display the humidity within the humidification area. 3. Multiple safety protection devices ensure that the nozzle does not drip or spray water. 4. Easy and fast installation, spray direction can be adjusted at any angle, excellent performance, and long service life. |
|
Performance parameter table
|
Shanghai Shifu Soda water mixing humidifier |
Gas flow rate(L/min) | Spray volume(kg/h) | Shao Te average value | ||||||
| 2.5bar | 3bar | 4bar | 2.5bar | 3bar | 4bar | 2.5bar | 3bar | 4bar | |
| SF-QJI | 30 | 35 | 45 | 2.3 | 2.5 | 2.6 | 9.6 | 8.5 | 7.6 |
| The humidification capacity of the Shanghai Shifu Soda Water Mixing Humidifier with four nozzles is approximately10kg/h | |||||||||

Technical parameters of the product
| material | Main shell road | Polypropylene (PP) | Corrosion resistant and durable |
| spray nozzle | 316 stainless steel | Corrosion resistant and durable | |
| retainer | VITON | — | |
| weight | Single nozzle | 210g | — |
| 4 nozzles | 250g | — | |
| Connection method | Gas path | Rc1/4 | Pipe diameter Φ 10mm |
| water | Rc1/8 | Pipe diameter Φ 8mm |
characteristic:
| Controllable pressure setting, controllable coverage range At a pressure of 3 bar, a single humidifier can achieve ideal humidification and cooling management of 100 square meters with a nozzle single-sided mist distance of 2-4 meters. 2. Pneumatic, two-stage atomization spray system Using gas as power will promote the air flow during spray, so as to improve the environment and avoid uneven cooling effect before and after the water curtain. 3. Dual control design effectively prevents nozzle blockage The mixed design of air and water routes solves the problem that the nozzle of the traditional spray process is easy to block. 4. High quality spray particles to avoid wetlands Two stage atomization system, the uniformity of spray particles *****, the extremely fine water mist can quickly evaporate, avoiding the occurrence of wetland phenomenon. |
Product Rendering
|
|
|
|
|
wetAutomatic control (standard configuration) Place the humidity sensor controller in a location where the humidifier cannot directly blow and is easy to observe, connect the wall power supply, and connect the output terminal to the humidifier. This way, when the humidity reaches the set value, the humidifier will automatically stop humidifying. When the humidity drops, it automatically turns on for humidification to maintain the required room humidity. Large font high brightness digital display screen, long-life resistive humidity sensor controller. Control accuracy ± 5%. |
![]() |
|
Filter (standard configuration) 10 inch 5 μ cup precision filter, specially designed without cracking, can filter out rust in water Solid particles such as sand, hemp rope, raw material tape, colloids, etc. We also offer alternative water tanks with stainless steel or hard plastic casings. |
![]() |
|
Fully automatic water softener, pure water purifier (optional) Use the fully automatic water softener provided by Shifu Company to delay the formation of wet film fouling on the evaporation material (extend the replacement time, usually every 8-15 years). The control head of the fully automatic water softener is a product of FLECK, a US company. The device has a high degree of automation and is controlled by a program to achieve automatic operation. The regeneration process is fully automated, and users only need to regularly add regeneration agents (industrial salt) to achieve continuous water supply under fully automatic conditions. |
![]() |
Precautions for Humidifiers
The system needs to provide a water source; The water source pressure shall not be less than 1kg/h.Air pressure is 2.5-4.5 bar, water pressure is 1-4 bar. Install air pressure regulating valves in the air circuit and water pressure regulating valves/valves in the water circuit.
This set of spray system needs purified water, soft water or pure water.
The customer provides a stable voltage of 220V.









