The air-cooled box type chiller mainly consists of a scroll compressor, an efficient V-shaped fin condenser, a filter, a liquid circuit control valve, a thermal expansion valve, an internally threaded copper tube evaporator, an electrical control system, etc.

1、 Vortex compressor:

1、Adopting fully enclosed vortex compressors imported from Europe, America, and Japan, it has low noise Efficient and profitable Low energy consumption Lower failure rate, safe and stable operation Features such as excellent performance and reliability.

2. Efficient V-shaped finned condenser/shell and tube evaporator:

3、Condenser copper tube types: light tube and internally threaded tube, aluminum foil types: green water foil and light foil, aluminum sheet: hydrophilic film aluminum sheet, white film aluminum sheet. The evaporator adopts high-quality copper pipes over 1.5mm thick, with internal thread design, large pipe diameter, high flow rate, and good cooling effect.

2、 Electrical component control system:

Imported digital display temperature controller with well-known domestic brand electrical control configuration to ensure safe and stable operation of the unit. Not only does it extend the service life of the machine, but it is also easy and intuitive to operate;

1. The air-cooled condenser adopts an imported fan and a large axial flow design with high heat transfer efficiency.

2. The air-cooled series does not require a cooling pump or water tower, and is easy to install, suitable for use in environments with limited production space. Ethylene glycol solution can be used as a refrigerant, and the outlet temperature of chilled water can be controlled above -35 ℃.

3. The air-cooled chiller is equipped with two refrigeration circuits, so even if one circuit fails, the other circuit can operate normally.

The bottom of the body is equipped with movable casters, which are flexible and convenient to use.

4. The unit features a streamlined and aesthetically pleasing design, with a sloping operation panel (humanized design), making the operating procedures clear at a glance.

The unit is equipped with a stainless steel water tank and a high-performance, high flow dedicated water pump.

5. The assembly of the chiller, refrigerant filling, and internal accessories are all completed in the factory. On site, only the power supply and water pipes need to be connected to use it, which has the characteristics of simplicity and economy.

This series of models can be customized with ultra-low temperature liquid outlet temperatures ranging from 7 ℃ to -25 ℃

Note:
1. Refrigeration condition: The refrigerant is a 60% ethylene glycol aqueous solution; The inlet/outlet temperature of the cooling water is 32/37 ℃.
2. Scope of work: The outlet temperature of the cooling water is between 22 ℃ and 37 ℃, and the inlet temperature difference of the cooling water is between 3.5 ℃ and 10 ℃;
3. The outlet temperature of the frozen liquid is -5 ℃ to -15 ℃, and the temperature difference between the inlet and outlet of the frozen liquid is 2.5 ℃ to 5 ℃.
4、At the same time, our company can customize various anti-corrosion and explosion-proof units according to the specific needs of customers.
5、If there are any changes to the above specifications without prior notice, this will help our company to bring the latest technological achievements to customers at any time.