Advertising engraving machine 1212

Advertising engraving machine 1212:

It is an advertising engraving machine and a 1212 engraving machine, also known as a computer numerical control advertising engraving machine and a computer numerical control 1212 engraving machine

Advertising engraving machine 1212
Detailed introduction to the button functions of the advertising engraving machine 1212:

Advertising engraving machine function
1. Pause: When the processing file has been loaded, if the system is idle, press this key to start the system running

Work procedures; If the system is already in processing mode, pressing this key will pause the processing

2. Stop: Stop the current operation. If the system is in processing mode, press this key to stop the processing; If the system is in a floating blade shape

Press this key to stop floating tool alignment
　　
Advertising engraving machine products

3. Resume at breakpoint: If the system is in a processing pause state, press this key to resume processing at the breakpoint

4. Continuous: Switch user data input to manual continuous

5. Spindle switch: If the spindle has been turned off, press this button to turn on the spindle; On the contrary, turn off the spindle

6. Return to origin: Press this button to execute the command to return to the workpiece origin
　　
Advertising engraving machine products

7. × 1: Press this key to set the jog step size to 0.01mm

8. × 10: Press this key to set the jog step size to 0.1mm

9. × 100: Press this key to set the jog step size to 1mm

10. X+: Move the tool in the positive direction of the X-axis. If it is in a continuous jog state, then continuously jog in the positive direction of the X-axis; otherwise

Move forward one step in the positive direction of the X-axis according to the current step size. Note: If in a continuous jog state, pressing this key alone will manually move the tool

Low speed continuous jog; Press and hold the shift key and the combination key of this key (press and hold the shift key again, do not release the shift key at this time)

The tool will be manually operated at high speed and continuously jog
　
Advertising engraving machine products

11. X -: Move the tool in the negative direction of the X-axis. The movement speed, step size, and combination keys are the same as the X+key instructions

12. Y+: Move the tool in the positive Y-axis direction. The movement speed, step size, and key combination are the same as the X+key

13. Y -: Move the tool in the negative direction of the Y-axis. The movement speed, step size, and key combination are described with the X+key

14. Z+: Move the tool in the positive Z-axis direction. The movement speed, step size, and key combination are described with the X+key

15. Z -: Move the tool in the negative Z-axis direction. The movement speed, step size, and key combination are the same as the X+key instructions.

16. Gear Shift: Pressing this key alone has no function, only when pressed in combination with other keys does it have a corresponding function; Combination of species

See the description of other buttons in the class

17. Knife alignment: This refers to the second key on the left side of the fifth row of the dedicated keyboard. Pressing this key will cause the system to perform floating knife alignment

18. F -: Press this key to decrease the feed rate.

19. F+: Press this button to increase the feed rate.