8-ton fully automatic sodium ion exchangerIt consists of three main parts: resin tank (main tank and auxiliary tank), hydraulic control valve, and salt tank. The basic principle is that the two turbines inside the hydraulic control valve, driven by the water flow, respectively drive two sets of gears, cleverly driving the valves of different channels to open and close according to the changes in accumulated flow, automatically completing the circulation process of the water softener's operation, regeneration, cleaning, drainage, and salt tank replenishment, and automatically switching between the two tanks, one in use and one backup, ensuring uninterrupted supply of soft water.

The self-control system is not limited by pipe diameter, and the diameter of diaphragm valves is relatively large, making them very suitable for large-scale softened water equipment

Features of an 8-ton fully automatic sodium ion exchanger:

1. The self-control system is not limited by pipe diameter, and the diameter of diaphragm valves is relatively large, making them very suitable for large-scale softened water equipment. Usually between 30-60 tons per hour.

2. Due to the fact that diaphragm valves are mostly operated in an open closed manner, they are not easily clogged. Therefore, compared to other methods (such as plug type) of sodium ion exchangers, it is more effective in treating water

The clutter has strong resistance ability.

3. You can choose between downstream or upstream regeneration methods.

4. Easy to maintain and durable.

5. You can choose between flow type or timed type.

6. Single tank or double tank (one for use and one for backup) can be selected.

The self-control system is not limited by pipe diameter, and the diameter of diaphragm valves is relatively large, making them very suitable for large-scale softened water equipment

Daily maintenance of 8 tons of fully automatic sodium ion:

The daily maintenance and management work only involves adding salt to the salt tank. Clean large salt particles should be used to avoid impurities blocking and affecting normal operation. According to the water usage situation, regularly check the remaining salt in the box, open the salt box cover. If the salt cannot be seen, it will cause the effluent to be unqualified. In case of this situation, salt should be added immediately, and both tanks should be forcibly regenerated before being put into operation.