50-250 pipe three claw tractorIt is the most ideal equipment for pulling large-diameter pipes with a diameter of 160 or more. Three traction frames are distributed at a 120 ° angle, which can effectively clamp pipe products and prevent deformation of the products. The upper traction frame cylinder is simultaneously filled with air at both ends and compressed by a pressure difference cylinder, making the traction frame less likely to loosen and slip. The following two towing frames are electrically lifted and lowered through a gearbox. Variable frequency speed regulation, with a wide range of speed regulation and uniform speed. The traction machine uses a forward and reverse switch, and the traction lead pipe can easily pass through the vacuum box to reach the front of the mold head. The humanized design makes the operation easier and more convenient.

Zhangjiagang Huade Machinery PVC, PE50-250 Pipe Three Claw Tractor Plastic Extruder Production Line Auxiliary Machine

Maintenance and upkeep:

1. After the first 10 hours of operation, a comprehensive inspection should be conducted, and if necessary, all connecting parts should be tightened once.

2. All parts must be kept clean, especially the inner walls of the mixing container and the material feeding holes should be cleaned thoroughly. If the equipment is not in use for a long time, the inner walls and discharge parts should be coated with rust proof grease.

3. After the first 10 hours of operation, the tension of the V-belt should be checked. When adjusting the tension screw to evenly tighten the V-belt, the motor seat plate locking bolt must be tightened to prevent loosening.

Zhangjiagang Huade Machinery PVC and PE plastic extruder production line auxiliary equipment

4. Regular inspection and maintenance are required. When vulnerable parts are damaged, they must be repaired or replaced in a timely manner.

5. Electrical equipment should be regularly inspected, especially the heater. If any damage is found, it should be replaced in a timely manner. 6. It is necessary to follow the operating procedures, which is the maintenance and upkeep of the equipment.

Zhangjiagang Huade Machinery PVC and PE plastic extruder production line auxiliary equipment