1. Maximum test force: 200kN

2. Load sensor capacity: 20000kg (200kN)

3. Accuracy level: Level 1, Level 0.5

4. Test force measurement range: 0.2% to 100% FS (full range)

5. Test force resolution: ± 1/500000 of the maximum test force, with no grading throughout the entire process, and the resolution remains unchanged.

6. Force control: Force control speed range: 0.001% to 10% FS/s.

Accuracy of force controlled speed control: ± 0.2% at 0.001% to 1% FS/s; ± 0.5% at 1% to 10% FS/s.

Force control maintains accuracy: ± 0.002% FS.

7. Deformation measurement range: 0.5% to 100% FS (full range)

8. Deformation resolution: ± 1/500000 of the maximum deformation, with no grading throughout the entire process, and the resolution remains unchanged.

9. Deformation control: Deformation control speed range: 0.001% to 10% FS/s.

Deformation control speed control accuracy: ± 0.2% at 0.001% to 1% FS/s; ± 0.5% at 1% to 10% FS/s.

Deformation control maintains accuracy: ± 0.002% FS.

10. Displacement resolution: 0.016 μ m

11. Accuracy of displacement indication: ± 0.2%

12. Displacement control: Displacement control speed range: 0.001-200mm/min.

Displacement control speed control accuracy: ± 0.2%;

Displacement control maintains accuracy: no error.

13. Constant force, constant deformation, and constant displacement control range: 0.2% to 100% F • S

14. Constant force, constant deformation, and constant displacement control accuracy: ± 1% when the set value is less than 10% F • S/s; When the set value is ≥ 10% F • S/s: ± 0.5%.

15. Effective test width: 400mm

16. Effective stretching space: 700mm, 1000mm

17. Effective compression stroke:700mm、1000mm

18. Control system: Fully microcomputer automatic control.

19. Remote control manual controller: available

20. Unit selection: g/Kg/N/KN/Lb

21. Multiple protection: The system has protection against overcurrent, overvoltage, undercurrent, undervoltage, phase loss, phase mismatch, leakage, etc; The itinerary has triple protection of programmable limit, limit, and software limit. In case of emergency, emergency braking can be applied..

22. Host structure: Door type, dual space, novel structure, beautiful and elegant, smooth operation

23. Working environment: temperature -10~+40 ℃, relative humidity 10%~95% RH;

24. Power supply: 220V 50Hz 3.0kw

25. Host weight: 850kg 1050kg

26. Overall dimensions of the host: 850 * 510 * 2200mm850*510*2500mm

27. Execution standards: GB/T16491-2008, GB/T2611-2007, GB/T228-2010, JJG1063-2010, JJG762-2007

• Software system: software packages in both Chinese and English for Windows 2000/XP/Win7 platforms
• Automatic storage: Test conditions, test results, calculation parameters, and gauge position are automatically stored.
• Automatic return: After the experiment is completed, the crossbeam of the testing machine will automatically return to the initial position of the experiment.
• Continuous test: After setting a batch of test parameters, continuous testing can be conducted.
• Multiple curves: Multiple different curves can be displayed on the same graph, including load displacement, load time, displacement time, stress-strain, load two-point extension, and more.
• Curve comparison: The curves of the same group of samples can be overlaid and compared on the same graph.
• Report editing: Different report formats can be output according to user requirements.
• Dynamic display: During the testing process, the load, elongation, displacement, and selected test curves are dynamically displayed in real-time on the main control screen as the test progresses.
• Automatic scaling: In the experiment, if the coordinates of the load, elongation, and other curves are not selected properly, the coordinates can be automatically changed according to the size of the measured values. Ensure that the curve is displayed on the screen in its maximum form under any circumstances.
• Peak holding: Throughout the entire testing process, the maximum value of the test item is displayed on the screen window as the experiment progresses.
• Execution standards: Meet various testing methods and standards such as GB, ISO, JIS, ASTM, DIN, etc.

after-sale service

• Free home delivery, one-year warranty, lifetime service
• Free on-site installation, debugging, and training
• Free lifetime upgrade of experimental software for users
• During the warranty period, if the equipment malfunctions, free on-site repairs and free replacement of parts will be provided
• If the equipment malfunctions outside the warranty period and requires on-site repair, only the cost fee (travel expenses+material costs) will be charged

Training content

• Relevant personnel have achieved proficiency in operating equipment
• Relevant personnel have achieved proficiency in handling equipment malfunctions
• Training on equipment maintenance and daily upkeep work
• Training on troubleshooting common and special equipment malfunctions