detailed description

ADVANCETM 1610B series single probe gas detector

This detector has high sensitivity and can monitor chlorine or sulfur dioxide gases with concentrations lower than those required by OSHA (Occupational Safety and Health Act) regulations.

After detecting the presence of gas, the sensor immediately responds and quickly returns to normal after the gas is cleared. The sensor is also designed to avoid false alarms caused by interfering gases and environmental factors.

The 1610B series detector is designed to have anti-interference ability against general radio frequencies/electromagnetic waves in industrial and municipal factory environments.

The gas detector adopts a modular design, making the installation of the receiver and sensor components simple and convenient.

♦ Sensors are maintenance free and have a long lifespan
♦ Dual channel alarm output signal for remote alarm and device control use
♦ audible and visual alarm
♦ Rapid response to chlorine, sulfur dioxide, or ammonia gas
♦ Protection level NEMA 4X
♦ Backup power supply supports uninterrupted operation
♦ RFI/EMI anti-interference protection

Technical Parameter
receiver
Quality standard: Passed ISO 9001 quality certification
Quality certification: Passed CE certification
Power requirement: 120 or 240 Vac, 50/60 Hz, single-phase
Power consumption: 12 watts
Self sensor input signal: 4-20mA DC
To sensor power output: 18-24V DC
Sensor stability timer: can be jumper selected for 1/2, 1, 2, 4, 8, and 16 minutes
Light column display range: CL2 and SO2 0-10 ppm; NH3 0-50 ppm、0-100 ppm
Accuracy: ± 1 light column segment
LED indicators: power, standby, alarm, fault, light column display
Detection signal output: 4-20mA DC, maximum impedance of 900 ohms
Rated capacity of alarm and fault controller: maximum 10 A @ 240 Vac or 10 A @ 28 Vdc resistive or inductive load, dual alarm output signal selected through jumper SPDT (single pole double throw) (N.O./N.C.) (normally open/normally closed); DPDT (double pole double throw) (N.O./N.C.) (normally open/normally closed) alarm and fault contact type: can be selected by jumper to lock type alarm (manual reset) or non lock type alarm (automatic reset)
Protection level: NEMA 4X

Chlorine and sulfur dioxide sensors
Response time: After stabilization, reach 80% range within the concentration range of 20 ° C10 ppm, with a maximum response time of 30 seconds
Type: Electrochemical sensor for micro redox reaction type
Gas and measurement range: Chlorine gas (Cl2) 0-10 ppm or SO2 0-10 ppm
Minimum measurable concentration: 0.5ppm by volume ratio
Working temperature range:- 2 ° F to 131 ° F (-20 ° C to 55 ° C)
Working humidity range: 2% to 98% R.H
Recovery time: 10 ppm gas concentration 90% range, recovery time is 3 minutes:
Maximum distance between receiver and sensor: 1000 feet (305 meters)
Shell: NEMA 4X
Weight: 9 ounces (0.25 kilograms)
Ammonia sensor
Type: Electrochemical type
Measurement range: 0-50 ppm or 0-100 ppm
Bias voltage: 0 millivolts
Linear:<10% full-scale E
Response time at 20 ° C:
t50:< 20 seconds, counted from 5 minutes of contact
t90:< 60 seconds, counted from 5 minutes of contact
Long term sensitivity drift:<5% every 6 months
Working conditions:
Temperature range:- 20 ° CdC to+40 ° CdC
Temperature range:- 20 ° C to+40 ° C
Humidity range: 15-90% r.H, non freezing