1Product composition:

Turbine fanMainly composed of impeller, casing, air inlet, transmission group, etc

2Product features:

1.Centrifugal cycle design. High pressure and large air volume. Airflow buffering design for lower noise

2.Small starting torque, stable and reliable working process

3.Turbine fanOil free lubrication design, cleaner gas

4.Surface phosphating treatment. Electrostatic spraying, uniform color, stronger adhesion

5.Wide range of power configuration and long product lifespan.

3Installation precautions:

3.1.Flat washers and spring washers must be used to tighten screws;

3.2.It is recommended to use rubber buffer to withstand the weight of the vortex air pump, especially for high-power vortex air pumps, which are essential;

3.3.For certain occasions where noise is required, a muffler can be installed to reduce the noise (usually around)5dBThe muffler is installed at the end of the inlet or outlet duct;

3.4.For certain occasions with high noise requirements, a layer of soundproofing foam can be added based on the machine's own conditions to meet the on-site noise requirements. For more information, please consultTurbine fanManufacturers or experienced noise control companies;

3.5.When using sound-absorbing foam, pay attention to the distance between the vortex air pump and the box, the ventilation and heat dissipation of the high-pressure blower, and the use of rubber buffer to bear the weight of the high-pressure blower. For specific details, please consult the manufacturer of the vortex air pump.

3.6. TurbofanThe inlet and outlet pipes should be connected using hoses to isolate vibrations.