VIP member
ZQW43J-6 * 1800 Steel Plate Diagonal Cutting Production Line
ZQW43J-6 * 1800 Steel Plate Diagonal Cutting Production Line
Product details
The ZQ11 series steel plate diagonal cutting production line produced by our factory adopts the rolling cutting principle, with no noise and automatic operation. It can cut steel plates and stainless steel plates of 1-8mm at will, and the length can be determined according to user requirements. It has the advantages of precise cutting size, fast speed, smooth cutting, no deformation, no need to draw lines when cutting trapezoidal plates, energy saving and no consumables. Especially suitable for street lamp manufacturers and cutting of longer boards
Technical parameter table of ZQ11 series steel plate diagonal shearing machine
|
Machine tool model |
Maximum cutting length |
Maximum Shear Material Thickness |
Maximum cutting plate width |
Running speed of walking device |
Motor Power |
||
|
|
mm |
mm |
mm |
M/minute |
kw |
||
|
|
|
|
|
|
Rolling shear |
Feeding device |
Loading and feeding materials |
|
ZQ11-12-2400-14000 |
14000 |
3~12 |
4000 |
25 |
2*5.5 |
11 |
3 |
|
ZQ11-8-2400-14000 |
14000 |
3~8 |
2400 |
25 |
2*3 |
4 |
3 |
|
ZQ11-6-2400-14000 |
14000 |
3~6 |
2400 |
25 |
2*3 |
4 |
3 |
|
ZQ11-16-2400-14000 |
14000 |
4~16 |
4000 |
25 |
2*5.5 |
11 |
3 |
Machine usage and characteristics:
Purpose: This machine is suitable for cutting and processing sheet metal, especially long sheets. It is easy to operate and the length of the cut sheet metal can be adjusted freely, with high labor productivity. The sheet to be cut is pressed onto the walking device by a hydraulic cylinder, and under the rotation of the rolling blade, the sheet is cut along with the running of the walking device. When pressing the material, place the board diagonally according to the required size, and you can cut the tapered board. Therefore, this machine is widely used in industries such as lamp posts, containers, metal structures, ships, daily hardware, and construction.
characteristic:
1. The rolling disc cutter is mounted on two main shafts, and the power is transmitted by a motor through a reducer. The speed can be adjusted freely, without noise, and the operation is simple Drive the main and secondary shafts, and the cutterhead rolls in opposite directions. The cutterhead is made of 6CrW2Si material, which has high shear strength, good mechanical properties, and long service life.
2. The walking device relies on rollers, and the transition roller runs on the track, driven by a motor through a reducer, running smoothly and transmitting reliably. The speed is coordinated with the rolling cutter and can be adjusted freely. The sheet is compressed onto the operating device by multiple hydraulic cylinders to ensure accurate cutting dimensions.
3. The walking device is welded with thick steel plates, and the split structure is convenient for equipment transportation and installation. The cutting length can be extended or shortened according to user requirements.
4. The feeding device has a simple structure, equipped with 4-5 blocking points, and controlled by hydraulic cylinders for feeding and discharging. The thickness of the steel plate that needs to be cut can be changed at any time. The trapezoidal plate does not need to be marked and can be directly cut, with low labor intensity and simple operation.
5. In terms of electrical design, the rolling head and walking device are controlled separately to adjust the speed arbitrarily, and the clamping cylinder and driving motor are equipped with interlocking actions to ensure safe, convenient, and reliable operation.
Finished product factory photos
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-