content

Code Description

XSK-

Analog universal input, 0.2 level display accuracy; The measurement and control speed can be set to 10 or 40 times per second

External dimensions

AH

160×80×125horizontal typeHole size: 152 × 76(Note ①)

AS

80×160×125VerticalHole size: 152 × 76(Note ①)

B

96×96×76Hole size: 92 × 92(Note 2)

CH

96×48×82horizontal typeHole size: 92 × 45(Note ③)

CS

48×96×82VerticalHole size: 92 × 45(Note ③)

D

72×72×75Hole size: 68 × 68(Note ④)

E

48×48×88Tray PackHole size: 45.5 × 45.5(Note ⑤)

Panel specifications

Dual 4-digit LED display

Alarm (optional) (250V AC/3A, resistive load)

A

T1～T4

1The 4-point alarm relay outputs are both normally open and normally closed dual contacts

O1～O4

1Around 4 o'clockOCGate output (voltage should be less than 40V DC, current should be less than 40mA)

B

T1～T2

1~2-point alarm relay output, both with normally open and normally closed dual contacts

T3～T4

3The 4-point alarm relay outputs are all single normally open contacts

O1～O4

1Around 4 o'clockOCGate output (voltage should be less than 40V DC, current should be less than 40mA)

C

T1～T2

1~2-point alarm relay output, both with normally open and normally closed dual contacts

T3

3Point alarm relay output, all with single normally open contacts

T3R

3The output of the alarm relay is both normally open and normally closed dual contacts.

T4

4Point alarm relay output, the first 3 points are single normally open contacts, and the fourth point is a double contact of normally open and normally closed.

O1～O4

1Around 4 o'clockOCGate output (voltage should be less than 40V DC, current should be less than 40mA)

D

T1～T2

1～2Point alarm relay output, 1-point normally open+normally closed dual contact; 1 point normally open contact

T3

3Point alarm relay output, point 1 is a normally open+normally closed dual contact, and the other 2 points are single normally open contacts

O1～O3

1~3 o'clockOCGate output (voltage should be less than 40V DC, current should be less than 40mA)

E

T1～T2

1～2Point alarm relay output, all with single normally open contacts

O1～O2

1~2 o'clockOCGate output (voltage should be less than 40V DC, current should be less than 40mA)

Contact input (optional)

K

1External switch input for resetting

Transmission (optional) (resolution: 1/3000; load capacity 600 Ω)

A1

Current output (4-20) mA, (0-20) mA, (0-10) mA

A2

Voltage output (0-5) V, (1-5) V

A3

Voltage output (0-10) V

A4

Voltage output (-5V~+5V)

A5

Voltage output (-10V~+10V)

External power supply (optional)

B1

24V±5% 50mAbelow

B2

12V±5% 50mAbelow

B3

10V±5% 50mAbelow

Communication (optional) (Communication protocol can be selected through instrument parameters: Modbus RTU or TC-ASCII protocol)

S1

RS232interface(AH, AS, B sizes only)

S2

RS485interface

Power specifications

V0

100-240 V AC 50/60 Hz

V1

10-24V AC 50/60 Hz；10-24V DC

Installation method

—AP

Disk mounted (E size only)