The XD-II multi tube cyclone dust collector is a type of dust collector with a dust removal efficiency of over 95%. The resistance of the dust collector body is less than 900Pa, and the existing boiler induced draft fan can ensure the normal operation of the boiler. This dust collector has good load adaptability, with a dust removal efficiency of over 94% at 70% load.

The working principle of XD-II multi tube cyclone dust collector is:

The dusty airflow enters the cylinder through the flue, which is a circular cylinder. Water enters the main cylinder from the upper water tank of the dust collector, forming a layer of water film on the inner wall of the entire cylinder to flow from top to bottom. The flue gas enters the cylinder from the lower part of the cylinder tangentially and rotates upward inside the cylinder. The dusty gas always rubs against the water film on the inner wall of the cylinder under the action of centrifugal force, so that the dusty gas is wetted by the water film. The dust particles flow with the water to the bottom of the dust collector and are discharged through the overflow hole. The bottom of the cylinder is sealed and equipped with a water seal groove to prevent the smoke from leaking out from the bottom. There are cleaning holes for easy cleaning of the bottom of the cylinder. After dust removal, the wastewater is discharged from the bottom overflow hole into the sedimentation tank, where it is neutralized and recycled.

The XD-II multi tube cyclone dust collector is equipped with a conical reflector to prevent the separated dust from being rolled up again by the two airflows and carried out by the rising airflow, thus improving the dust removal efficiency.

The cyclone element in the XD-II multi tube cyclone dust collector is made of cast iron or ceramic, with a thickness greater than 6mm, therefore it has good performance. This dust collector is not only suitable for various boiler dust control, but also an ideal equipment for dust control in industries such as metallurgy, mining, building materials, and chemical engineering.

The dust removal efficiency of XD-II multi tube cyclone dust collector can reach over 95%, and the resistance of the dust collector body is less than 900Pa. The existing boiler induced draft fan can ensure the normal operation of the boiler. This dust collector has good load adaptability, with a dust removal efficiency of over 94% at 70% load.

Characteristics of XD-II Multi tube Cyclone Dust Collector:

1. The ceramic core of the ceramic multi tube dust collector is smooth and durable, with high air volume and strong load adaptability, and will not cause blockage. Small footprint, the multi tube cyclone dust collector can be installed flexibly according to the user's site conditions and local conditions. It can be placed indoors or outdoors.

2. Suitable for dust control of industrial boilers and thermal power station boilers of various models and combustion methods.

3. For other industrial dust, multi tube cyclone dust collectors can also be used for treatment, and multi tube cyclone dust collectors can also be used for the recovery of cement and other practical dust.

4. Less one-time investment. Compared with electrostatic precipitators, this dust collector has a lower total investment. Compared with water film dust collectors, it does not require circulating water, has no secondary head, no wastewater discharge, and does not require additional water treatment equipment.