Delger X-am7000The product can continuously test up to 5 gases simultaneously. More than 30 different combinations of sensors can provide flexible solutions for your detection tasks. This instrument can be equipped with three electrochemical sensors and two catalytic combustion sensors or infrared sensors.

1. Flexible and diverse sensors
Delger's 30+sensors can detect over 100 types of gases and vapors. For some sensors, the gas to be measured can be selected from the gas list in the menu without the need for recalibration. This design can increase the variety and measurability of the gases being measured. Delger sensors are known for their fast response time, low cross sensitivity, high sensitivity, and long lifespan.

2. Durable and sturdy
The Delger X-am 7000 is equipped with a built-in dust-proof film, with a protection level of up to IP67, which can be submerged in water for a short period of time without any damage. In addition, there is a specially designed leather case that can be used together, even if it falls from a height of 1.5 meters, it will not be damaged.

3. Type plug and play sensor
The instrument can automatically identify each sensor. All sensors have been pre calibrated and only need to be replaced to complete the reconfiguration of the X-am7000. No additional maintenance or service is required.

4. Leak detection function
The Delger X-am7000 is capable of performing leak detection. A new and flexible gooseneck probe can be used for leak detection of flanges, major repairs, and valves. In tracking mode, the instrument will emit a strengthened or weakened beep sound based on the detected changes in gas concentration.

5. Intuitive software functionality
The Delger X-am7000 software has a user-friendly interface and is easy to operate. With basic training, operators can master its powerful functions, such as quickly viewing or enabling TWA and S values, as well as peak recording and saving.

6. Long service life
The newly designed built-in charging management module's rechargeable battery allows the instrument to operate normally for 20 hours (depending on the battery model). Alkaline battery compartment can also be provided. The Delger X-am7000 can be equipped with Delger sensors with a lifespan of up to 5 years. If configuration changes are required, the instrument can be completed through simple steps.

7. Multiple alarm methods
Users cannot ignore the alarm, the sound alarm volume is high, and the light alarm is visible within 360 °. The Delger X-am7000 emits a life signal every 6 seconds to indicate that all functions of the instrument are functioning properly.

8. Data management
The built-in data storage can store 3000 sets of data - if one set of data is recorded per minute, it can be stored for 50 hours. Through the infrared interface and GasVision software, data can be transmitted to a computer for statistical analysis.

9. Quickly view information
The large character display screen and automatic alarm focusing function make the displayed data and signs easy to recognize, and can immediately determine whether the working environment is dangerous. All information has simple text prompts.

10. Powerful built-in pump
The powerful built-in pump has a sampling distance of 45 meters. The instrument can continuously monitor the working condition of the pump, and when the pump flow rate is low, the instrument will issue an alarm.

Technical parameters:

authentication:

sensor

Standard configuration:
Host (including sensors), charging unit, instruction manual

Optional accessories:
Portable bag, pump adapter, alkaline battery compartment, charging unit, car charging adapter, extendable probe, leak detector, float probe, water dust filter, E-Cal assembly.