WF oil suction filterIt is installed at the suction port of the oil pump to protect the oil pump and other hydraulic components, avoid inhaling pollutants and impurities, effectively control hydraulic system pollution, and adjust the cleanliness of the hydraulic system.

1. Inlet and outlet diameter: In principle, the inlet and outlet diameter of the oil suction filter should not be smaller than the inlet diameter of the matching pump, generally consistent with the diameter of the inlet pipeline.

2. Nominal pressure: Determine the pressure rating of the filter based on the higher pressure that may occur in the filter pipeline.

3. The selection of pore size: mainly considers the particle size of impurities that need to be intercepted, and is determined according to the process requirements of the medium flow. The particle size that can be intercepted by various specifications of wire mesh can be found in the table "Filter Screen Specifications".

Filter area: 282-4320cm ²

Filtering accuracy: 80-180 μ m

Connection method: Thread

1. Petrochemical industry: Separation and recovery of products and intermediate products in refining and chemical production processes, as well as particle removal and filtration of oilfield injection water and natural gas.

2. Textile industry: Purification and uniform filtration of polyester melt during the drawing process, protective filtration of air compressors, and oil and water removal of compressed gases.

3. Thermal power industry: Purification of oil for lubrication systems, speed control systems, bypass control systems of gas turbines and boilers, purification of feed pumps, fans, and dust removal systems.