W-shaped anode plate, anode plate, ZT24 anode plate
The anode plate of the electrostatic precipitator is the core component of the electrostatic precipitator. The acceptance criteria for the anode plate are: straight, high strength, strong rigidity, and not easily twisted. After sales scope: deformation within the warranty period. The domestic universal standard plates for the anode plate of electrostatic precipitators are C480mm plate and Z-shaped 385mm plate. The company is equipped with two sets of multifunctional anode plate rolling mills and complete molds. It can produce anode plates such as C480, Z385, ZT24, etc. (roll change is sufficient).

The fluid in the pipeline must be consistent with the medium calibrated in the selected solenoid valve series model.
The temperature of the fluid must be lower than the calibration temperature of the selected solenoid valve.
Electromagnetic valves allow liquid viscosity to generally be below 20CST, and if it exceeds 20CST, it should be noted.
When the maximum pressure difference in the pipeline is less than 0.04MPa, direct acting and step-by-step direct acting types such as ZS, 2W, ZQDF, ZCM series should be selected; When the minimum working pressure difference is greater than 0.04MPa, a pilot operated (differential pressure) solenoid valve can be selected; The maximum working pressure difference should be less than the maximum calibration pressure of the solenoid valve; Generally, solenoid valves work in a one-way manner, so attention should be paid to whether there is a reverse pressure difference, and if a check valve is installed. When the fluid cleanliness is not high, a filter should be installed in front of the solenoid valve. Generally, solenoid valves require good cleanliness of the medium.
Pay attention to the flow aperture and pipe diameter; Electromagnetic valves are generally only controlled by a switch with two positions; If conditions permit, please install a bypass pipe for easy maintenance; When there is water hammer phenomenon, it is necessary to customize the opening and closing time adjustment of the solenoid valve. Dust bag
Pay attention to the impact of environmental temperature on solenoid valves
The power supply current and power consumption should be selected according to the output capacity. The power supply voltage is generally allowed to be around ± 10%, and attention must be paid to the high VA value during AC starting