|
Metallographic equipment:MP-1B/MP-2A/QG-4A/QG-5/QG-5A……………………………
|
MP-1BMetallographic Sample Grinding and Polishing Machine
The MP-1B single disc four speed grinding and polishing machine integrates pre grinding, polishing, and grinding in one machine, and only needs to replace the grinding and polishing disc to perform pre grinding, polishing, or grinding work. The machine rotates smoothly with low noise, and the speed change and replacement of the grinding and polishing disc are also very convenient. The diameter of the grinding and polishing disc is larger than similar products in China, which can increase the effective working surface by 20-30%. It can also be equipped with a PD-1 polisher for automatic polishing, which can be used for multiple purposes in one machine. It is the best choice for metallographic sample preparation equipment. The basic speed of this machine is 500/1000r/min, and it is equipped with
400/800r/min，
300/600r/min, 200/400r/min, available for users to choose and order.
Main parameters:
Grinding disc diameter: 250mm Sandpaper diameter: 230mm
Disc diameter: 220mm Grinding disc diameter: 220mm
Speed: 500/1000r/min
Motor: YSD802-4/8 380V 50Hz
Dimensions: 680 × 480 × 360mm
|
 |
|
|
Weight: 52KgMP-2A
Metallographic sample grinding and polishing machine
The MP-2A dual disc three speed metallographic sample grinding and polishing machine is a new type of grinding and polishing machine designed and manufactured by our company according to user requirements. The machine has a novel and beautiful appearance, smooth rotation, and low noise. Its frame, collection disc, cover, etc. are all made of stainless steel plates, which are durable and easy to maintain. When in use, only the grinding and polishing machine or polishing disc needs to be replaced to complete various processes such as rough grinding, fine grinding, dry grinding, wet grinding, and polishing of samples. It is an ideal and perfect metallographic sample preparation equipment.
Main parameters:
Grinding disc diameter: 250mm
Sandpaper diameter: 230mm
Dropping diameter: 220mm
Speed: 700/900/1400r/min
Motor: AO280-4/6/8，0.2kW，380V,50Hz
Dimensions: 1000-650-950mm
|
|
|
|
Net weight: 110kgQG-4A
Metallographic cutting machine
The QG-4A multifunctional cutting machine is mainly used to cut irregular general metallographic specimen materials such as cylindrical and polygonal shapes, as well as those with protrusions. The machine adopts a double shell fully enclosed structure and a courier clamping mechanism. It can ensure the cutting of samples in an absolutely safe state,
The device has adjustable thickness for front, rear, left, and right drag plate samples, and controllable feed speed. In order to avoid burning the tissue of the sample material due to overheating during cutting, the machine is equipped with a strong cooling system, and the sample can be rotated freely during cutting, which can avoid micro burns on the surface of the sample during cutting, increase the cutting section, and improve the utilization rate of the cutting grinding wheel. It has the advantages of operation, maintenance, and is an ideal equipment for cutting irregular sample materials.
Parameters
Larger cutting section: φ60mm
Speed: 2800r/min
Cutting blade specification: φ 250 × 1.5 × φ 32
Motor: YS802-2,1.2KW,380V,50Hz
|
|
|
|
Dimensions: 700 × 520 × 1110mmNet weight: 170Kg
QG-5
Metallographic cutting machine
The QG-5 metallographic specimen cutting machine is mainly used to cut irregular general metallographic specimen materials such as cylinders, polygons, and protrusions. The machine adopts a double shell fully enclosed structure and a double rapid clamping mechanism. It can ensure the cutting of samples in an absolutely safe state. The machine is equipped with front and rear drag plates, and the feed speed can be controlled. To avoid burning the tissue of the sample material due to overheating during cutting, this machine is equipped with a strong cooling system, which can prevent micro burns on the surface of the sample during cutting, increase the cutting section, and have the advantages of easy operation, maintenance, and upkeep. It is an ideal equipment for cutting irregular samples.
Parameters
Large cutting section: φ 120mm Speed: 2800r/min
Cutting blade specification: φ 400 × 3 × φ 32 |
|
|
Motor: Y112M-2，4KW，380V，50Hz
Dimensions: 760 × 850 × 1400mm Net weight: 380Kg
QG-5A metallographic specimen cutting machine
The QG-5A metallographic specimen cutting machine is mainly used to cut irregular general metallographic specimen materials such as cylinders, polygons, and protrusions. The machine adopts a double shell fully enclosed structure and a double rapid clamping mechanism. It can ensure the cutting of samples in an absolutely safe state. The machine is equipped with front and rear drag plates, and the feed speed can be controlled. To avoid burning the tissue of the sample material due to overheating during cutting, this machine is equipped with a strong cooling system, which can prevent micro burns on the surface of the sample during cutting, increase the cutting section, and have the advantages of easy operation, maintenance, and upkeep. It is an ideal equipment for cutting irregular samples.
Parameters
Large cutting section: φ 100 × 100 mm Speed: 2800r/min
Cutting blade specification: φ 350 × 2.5 × φ 32 |
|
|
|
