Single stage diaphragm pump is an excellent solution for continuously and oil-free extraction of gas or steam, used in applications that do not require high vacuum levels. In daily use, compared to water jet pumps, they do not require water resources and therefore do not produce any wastewater. Mainly used in vacuum ovens with medium air load, single or multiple suction filtration. Usually, this device is very suitable for gas extraction and oil-free exhaust. The single-stage structure enables the pump to simultaneously achieve high pumping speed and achieve70mbarThe advantages of extreme vacuum.
Performance characteristics
• Quiet exhaust and extremely low vibration
• There is still a strong suction force when performing multiple operations
• Can maintain good performance even at low vacuum values
• **Chemical corrosion resistance
• Long lifespan of diaphragm, maintenance free drive system
ordering information |
|
|
|
product name |
Working voltage and frequency |
plug |
order No |
ME 2C NT |
230 V~ 50-60 Hz |
CEEEuropean standard plug |
730100 |
TECHNICAL INDEX |
unit |
ME 2C NT |
Number of pump heads/series |
|
1/1 |
50/60 HzThe maximum pumping speed below |
m3/h |
2.1 / 2.4 |
50/60 HzThe maximum pumping speed below |
cfm |
1.2 / 1.4 |
Extreme vacuum (absolute pressure) |
mbar/torr |
70 / 52 |
Environmental temperature range (operation) |
°C |
1O~40 |
Environmental temperature range (storage) |
°C |
-10~60 |
*High outlet pressure (absolute pressure) |
bar |
1.1 |
Air inlet interface |
|
DN 10 mmHose nozzle connector |
Air outlet interface |
|
DN 10 mmHose nozzle connector |
Rated motor power |
kW |
0.18 |
50/60 HzRated speed below |
min-1 |
1500/1800 |
protection grade |
|
IP 40 |
Size (length)xwidexHigh) |
mm |
243 x 211 x 198 |
weight |
kg |
10.2 |
The noise level is50Hertz, typical value |
dBA |
45 |
NRTLstandard |
|
Canada and the United States |
ATEX conformity (only 230V) |
|
II 3G IIC T3 X Internal Atm. only |