product description
The four stage diaphragm pump designed specifically for chemistry is an excellent solution for continuous, oil-free pumping of corrosive gases and vapors, which can meet high requirements.MV 10C NTThe four stage pump structure has eight pump heads and is equipped with high pumping speed and0.9mbarThe advantages of ultra-high ultimate vacuum. All major components in contact with the pumped medium are made of chemically corrosion-resistant fluorine materials.PTFE “sandwich”The sandwich structure of the membrane enhances its reliability and extends its operating life.MV 10C NT +EKAdded exhaust gas condenser with outlet （EK）An effective solvent recovery system makes it a more outstanding and environmentally friendly system. The collection bottle for the air inlet is made of glass material (covered with protective film) to prevent particles and droplets from entering the pump, and can be used as an optional accessory.
Performance characteristics
· **Chemical corrosion resistance and steam resistance
· When approaching the ultimate vacuum, there is still a large pumping speed, which shortens the process time
· Quiet exhaust and extremely low vibration
· There is still a good ultimate vacuum when opening the gas town to blow and clean the condensate
· **The solvent recovery system makes it an environmentally friendly productEKModel of attachment)
TECHNICAL INDEX |
unit |
MV 10C NT +EK |
Number of pump heads/series |
|
8 / 4 |
50/60 HzThe maximum pumping speed below |
m3/h |
9.5 / 10.7 |
50/60 HzThe maximum pumping speed below |
cfm |
5.6 / 6.3 |
Extreme vacuum (absolute pressure) |
mbar/torr |
0.9 / 0.68 |
Extreme vacuum (absolute pressure), using gas ballast |
mbar/torr |
1.5 / 1.1 |
Environmental temperature range (operation) |
°C |
10 - 40 |
Environmental temperature range (storage) |
°C |
-10 - 60 |
*High outlet pressure (absolute pressure) |
bar |
1.1 |
Air inlet interface |
|
KF DN 25small flange |
Air outlet interface |
|
DN 10 mmHose nozzle connector |
coolant connection |
|
2individualDN 6-8 mmHose nozzle connector |
Rated motor power |
kW |
0.44 |
50/60 HzRated speed below |
min-1 |
1500/1800 |
protection grade |
|
IP 40 |
Size (length)xwidexHigh) |
mm |
528 x 387 x 395 |
weight |
kg |
29.1 |
The noise level is50Hertz, typical value |
dBA |
52 |
ATEX conformity (only 230V) |
|
II 3G IIC T3 X Internal Atm. only |
Product configuration |
|
The vacuum system is installed and connected for use, and comes with an instruction manual |
Optional Accessories |
|
PTFEpipeKF DN 25 (1000 mm: 686033)
Vacuum rubber tubeDN 10 mm (686002)
Air inlet separatorKF DN 25 (699979)
KFThe center bracket and sealing ring of the small flangeKF DN 25 C Al/FEP (635722) |
product name |
Working voltage and frequency |
plug |
order No |
MV 10C NT+EK |
230 V~ 50-60 Hz |
CEE |
744500 |
