Extruded aluminum (ASTM6005) cylinder body, with fine grinding and precision machining on the inner surface, and advanced anti-corrosion technology used both internally and externally. The cylinder has a low friction coefficient, long service life, and strong corrosion resistance.

Double piston gear tooth strip design, compact structure, symmetrical installation position, easy to change output shaft direction, long service life, and fast action.

The back of the piston rack is equipped with composite bearings and guide rings, which have precise movement, low friction coefficient, and long service life.

● Combination preloaded coated spring with long working life.

High precision gears and racks with small mesh clearance, high precision, and high output power.

Stainless steel fasteners, safe and aesthetically pleasing, with strong corrosion resistance.

Adopting international standard dimensions: output shaft slot, screw hole; The size of the top mounting hole complies with NAMUR standards; The size of the gas source interface complies with the NAMUR standard; The size of the bottom mounting hole meets the ISO5211 and DIN3337 standards, making it convenient to install accessories such as solenoid valve limit switches.

■ Work technical conditions

● Media used: compressed air, non corrosive gases, and oil;

Pressure range: Double acting 2-8 bar, single acting 2-8 bar

● Working temperature: Standard type (using nitrile rubber O-ring) -20 ° C -+80 ° C

Low temperature type (using nitrile rubber O-ring) -40 ° C -+80 ° C

High temperature type (using nitrile rubber O-ring) -20 ° C -+150 ° C

● Travel adjustment: There is an adjustable range of ± 4 ° at the 90 ° position;

Lubrication: Under normal working conditions, no lubricant needs to be added;

Installation: Suitable for indoor or outdoor installation;

Maximum operating pressure: Input air pressure does not exceed 10 bar.