Model: DSM-ZQ-2304B

Inner container size (mm): height 1600mm * 1200mm * 1200mm

Heating power: 21KW

Temperature parameters:

Temperature range: RT (room temperature) -250 ℃ (adjustable settings)

Temperature uniformity: ± 5 ℃ (constant temperature state test)

Heating rate: less than 20 minutes from room temperature to 100 ℃

Structure and Materials:

Shell material: High quality cold-rolled sheet, surface phosphating treatment, and spray ring hammer paint (color: beige)

Inner liner material: high-quality cold-rolled sheet, sprayed with high-temperature resistant silver powder paint

Track: Two national standard I-shaped track steels are used as tracks to facilitate the directional movement of the automatic trolley on the track.

The total length of the track is 3100mm, with a center to center distance of 1000mm.

Trolley: One self-propelled flatbed trolley, with a cross shaped frame made of channel steel, welded steel plates on the surface, and equipped with a paint tray. The trolley can bear a load of more than 2T

Power configuration: Equipped with a branded reduction motor, paired with a speed ratio gearbox, running at a speed of 5.5M/min.

Operation mode: The three buttons of in/out/stop are used to facilitate the entry and exit of the console car. In addition, a limit switch is added to locate the stop position of the car. The door car interlock device composed of infrared sensors ensures the safe operation of the car

Insulation material: 100mm thick high-temperature resistant aluminum silicate fiber insulation cotton, with good insulation performance

Door structure:

Quantity: Double door (independent mechanical explosion-proof port is set on the back of the box)

Thickness: 100mm aluminum silicate insulation cotton, locally reinforced installation of hinges and handles

Door Buckle: Chrome plated tight explosion-proof door buckle, beautiful, heat-resistant aluminum silicate fiber cotton sealing strip, long service life

Circulating system:

Hot air circulation: The circulation adopts high-pressure air supply, centrifugal blades, and good uniformity

Blower motor: Long shaft motor with 2 sets of alloy fan blades, placed on top of the oven

Motor power: 1100W * 2

Air intake/exhaust:

Air intake system: quantity 2, diameter 60mm

Exhaust system: One adjustable butterfly valve exhaust port with a diameter of 100mm, which can be equipped with a ventilation device and connected to the outside of the workshop to discharge exhaust gas

Heating system:

Heating element: High quality U-shaped covered far-infrared heater (with a lifespan of over 40000 hours)

Electrical system:

Temperature control device: intelligent LED dual digital display high-precision temperature control system, temperature control accuracy ± 1 ℃, temperature can be adjusted freely from room temperature to 250 ℃, and has PID self-tuning, automatic constant temperature and other functions

Overtemperature protection: Equipped with an independent overtemperature protection device, when the temperature exceeds the upper limit, it will automatically alarm and actively cut off the heating

Temperature measuring device: stainless steel armored PT100 sensor, K-degree thermocouple sensor, providing long-term stable signal transmission

Timer device: high-precision digital display automatic timer, 0-99.99 hour setting, can preset baking time

Alarm system: LTE-1101J rotary sound and light alarm system is adopted, which will sound and light alarm and automatically cut off heating when the time is up

Current and voltage: 380V/50Hz (equipped with pointer voltage and current meter)

Electrical components: using well-known brand electrical appliances

Safety devices: leakage, short circuit, overload protection; Overload and phase loss protection for blower motor

Additionally, accessories can be selected according to your needs:

1.Increase or decrease the number of layers 2.Stainless steel shelf; Load bearing shelves; Baking tray, etc 3.Staged program temperature control 4.over temperature protection 5.Mobile wheels

6.Strong exhaust ventilation 7.Temperature recorder 8.Observation window 9.Computer remote control, touch screenPLCcontrol

remarks:

*Our company provides the following 8A standard size trolley oven specification is provided for your reference or selection, and can also be customized according to your actual inner tank size requirements