Testomat 808 Online Water Quality Hardness Alarm Device
NameHardness online alarm (limit alarm)
Model:Testomat 808®
Brand:HEYL NEOMERIS
Place of OriginGermany
Description
German HEYL NEOMERIS online water hardness limit alarm monitor Testomat 808 ® The limit alarm is triggered by the red and green indicator lights, which is a compact and economical model developed based on HEYL's decades of experience using Testomat equipment worldwide and combined with new technology. It is easy to operate, maintain, operate reliably, and is durable, using the principle of colorimetric method.
Typical applications
Monitoring of water hardness in reverse osmosis systems, softener effluent, boiler water quality, and pure water production systems;
Advantages
When the hardness is too high, the system sends an alarm signal.
Compact and economical.• The measurement cycle can be set according to actual needs, 0-60 minutes, saving reagents.
The analysis time is approximately 2 minutes.
A set of 500ml reagents. (If the monitoring cycle is 30 minutes, the reagents can be used for 4-5 months.); If the monitoring cycle is 60 minutes, the reagent can be used for about 9 months. )High cost-effectiveness, reliability, and durability.
The maintenance workload is small, and it takes about 3-5 years to replace the reagent pump head.
• Reagent remaining amount display (insufficient remaining amount alarm)
72 hour unmanned operation
Colorimetric measurement
Technical indicators
|
Selectable monitoring alarm points: |
0.36, 0.89, 1.78, 3.56, 5.34, 8.90, 17.80, 35.60, 53.40 And 89.00ppm (mg/L) is optional. |
|
Measurement cycle: |
Average 2 minutes |
|
Alarm output: |
0/4-20mA |
|
Power requirements: |
24V/ 115V/230V/,50/60Hz |
|
Ambient temperature |
10-40℃ |
|
Size: |
364x314x138 (width x height x depth) |
|
Weight: |
4350g |
|
Water temperature: |
10-40 ℃ (KCN cooler is optional for water temperatures above 40 ℃) |
|
working pressure: |
0.3-1bar or 1-4bar, 4-8 bar requires the use of pressure reducing accessories |
|
Method authentication: |
EN61000-6-2 EN61000-6-4 EN61010-1 |
Reagent Table
| Indicator model | Alarm limit |
| 300 | 0.4 ppm |
| 300S |
0.9 ppm |
| 301 |
1.8 ppm |
| 302 |
3.6 ppm |
| 303 |
5.4 ppm |
| 305 |
9 ppm |
| 310 |
18 ppm |
| 320 |
36 ppm |
| 330 |
54 ppm |
