Techne Sand Bath Fluidized Bed (FB-08, FB-08C) from the United States

Product features:

The Techne sand bath fluidized bed in the United States uses aluminum oxide as the temperature transfer medium, which is dry powder, non-toxic, non corrosive, non flammable, non angular, and will not wear the surface of the sample. It will not react with the sample to produce gas, will not generate surface tension like a water bath, will not wet the sample, and has insulation and non conductivity. It circulates hot air through a vacuum pump, which is safer and more reliable than an oil bath. It is particularly suitable for metal processing (such as nickel titanium alloy, platinum metal), wire product testing, thermal testing of printed circuit board semiconductor devices, fine sensor sensitive components, and use as a constant temperature environment for chemical reactions

FB-08Characteristics of Sand Bath Fluidized Bed (Manual Control Type):

1. The Techne FB-08 precision sand bath fluidized bed in the United States adopts a PID temperature control processor, which has excellent temperature stability and uniformity, making it an ideal choice for critical temperature calibration and heat treatment processes

2. Nickel titanium alloy wire bracket, forming a safe control method, provides rapid heating and immersion in a fluidized bed through alumina medium, providing higher heat and faster heating time compared to ovens and salt baths

In Dead Bed mode (with the air compressor and sand bath power turned off), the thermal balance within the entire system will maintain high accuracy below ± 0.010 degrees within 3-6 minutes, used for calibrating and comparing temperature sensors

4.The Techne sand bath fluidized bed in the UK can be used to manufacture cardiovascular stents.

FB-08CCharacteristics of Sand Bath Fluidized Bed (Automatic Control Type):

1. Temperature correction can be performed

2. Equipped with RS232 port

3. Create, start, and store 20 step temperature curve programming, including temperature setting, temperature increment, heating rate, and dwell time

4. Fahrenheit/Celsius temperature unit switching

5. The automatic airflow controller will automatically adjust the flow rate according to the set temperature, and the Dead Bed mode (accuracy: ± 0.010 degrees) can also be loaded into the program

6. Open, save, store, and print data, set a recording interval of 5-60 seconds, and export to an Excel spreadsheet

Techne Sand Bath Fluidized Bed (FB-08, FB-08C) from the United States, please consult for details