The ISO 400 Novo CurveTM Surface Gloss Meter

No need to wait for data download, the LCD will display the screen index, high temperature, and a diagram of each sensor. Can measure a variety of products and patterns, including:

• finish
• Wood clear varnish
• Automotive components: interior parts, steering wheel, mudguard
• glazed ceramic
• Frosted glass... there are many more!

The test bench of the Engel 400 Novo CurveTM surface gloss meter is located at the top of the instrument, and the measuring workpiece should be placed on the center hole. This placement method can withstand repeated measurements. Press the button to obtain statistical analysis, and the data can be downloaded to the computer through the RS232 interface.

The measuring area of the ISO 400 Novo CurveTM surface gloss meter is approximately 3% (2mm x 2mm) of the area measured by a standard gloss meter.

The ISO 400 Novo CurveTM Surface Gloss MeterIt can store and calculate the average of up to 199 readings, allowing it to average large area samples. As long as the majority of samples are suitable, more representative results can be obtained through statistical analysis.

Cylinder measuring frame

The detachable cylindrical measuring frame can provide highly repeatable measurement results for cylinders with radii ranging from 5mm to 100mm.

The foam baffle can shield a large number of light sources, so that the cylinder is under good measurement conditions.

The measuring frame is adjustable and can measure cylinders with a radius of 5mm to 100mm

Has been applied to extruded plastic tubes, chromium alloy metal parts, and designer pen measurements.

The repeatability on the surface is only 0.5 GU.

The ISO 400 Novo CurveTM Surface Gloss MeterTechnical parameters:

Order number: LR-100255