Detailed information on the supply of six electric mixers:

The six link electric mixer is designed by our factory according to the requirements of our customers. Designed and manufactured on the basis of JJ-2 and JJ-3, it is widely used in laboratories of universities, environmental protection, scientific research, health, petroleum, metallurgy, chemical engineering, medical and other units. It is a commonly used and essential tool for laboratory technicians

Characteristics of Six Joint Electric Blender

JJ-4 typemixerMechanical timing is adopted, and a permanent magnet DC motor is selected as the motor, which has the function of increasing force, stable speed, continuous adjustability, and low noise. Six motors are used for stirring, and different speeds can be obtained according to experimental requirements. It is also equipped with lighting. The stirring rod is made of stainless steel, which enhances the anti-corrosion ability. The biggest feature of this machine is that it works well when laboratory personnel need slow instrument speed and the viscosity of the laboratory solution is strong for sampling

Six link electric mixerperformance

1. Power supply: Unidirectional AC 50Hz, 220V ± 10%

2. Motor power: 80 × 6

3. Speed: RPM

4. Mechanical timing: 0-120 minutes

Instructions for using a six link electric mixer

Six connected electric mixer JJ-4, first check if the accessories are complete, tighten the mixing rod on the motor clamp, place the solution bottle on the lifting frame, adjust the height according to the requirements, then turn on the power supply, turn on the power switch, and then turn on the timer. Turn on the respective speed switches according to the requirements, from slow to fast. To ensure safety, "be sure to use a grounding wire", and keep it clean and dry when using.

Precautions for six electric mixers

1. When using, if you find that the stirring rod is not concentric and the stirring is unstable, please readjust the clamping head to make the stirring concentric. If using a triangular flask for stirring, align the stirring rod with the center and then turn on the machine for stirring.

2. If the power suddenly fails during use, check if the power cord and plug have come off or if the fuse is blown. If there are no such conditions, please notify our factory for repair.

3. This machine has mechanical timing control. If timing is not required during operation, please adjust the timing knob to the normally closed (ON) position. If timing is required, please adjust it to the desired time.