VIP member
Step in wet heat test chamber
Brief description: The walk-in wet heat test chamber sold by the temperature shock test chamber manufacturer provides high temperature, low temperatur
Product details
Step in wet heat test chamber
| |||||||||||||||
| product mix | |||||||||||||||
| Inner box material | SUS # 304 stainless steel plate | ||||||||||||||
| External material | SUS # 304 stainless steel plate | ||||||||||||||
| Insulation material | Hard Polyurethane foam+glass wool | ||||||||||||||
| packing | Silicone foam tightening 1 strip | ||||||||||||||
| Storage rack | There are 2 height adjustable stainless steel shelves inside the box (material: SUS # 304 stainless steel) | ||||||||||||||
| heater | Stainless steel fin type heat sink U-shaped heating tube imported from Taiwan, China | ||||||||||||||
| humidifier | Design of Split Type Humidifier Cylinder | ||||||||||||||
| Wind turbine | 1 motor/stainless steel extended shaft/multi wing fan blade aluminum alloy wind wheel (SIROCCO FAN)/special adjustable hundred page air supply circulation system | ||||||||||||||
| Box door | Single door, double-layer door, embedded non reactive flat handle/four layer vacuum tempered glass enlarged window/electric automatic defogging, imported "PHILIP" lighting tube | ||||||||||||||
| Humidity system | One 15L stainless steel water tank is hidden inside/One automatic water supply pump (automatically supplying water from the lower water tank to the upper water tank)/Water recovery device/Water shortage alarm device | ||||||||||||||
| application | |
| This test chamber provides environments of high temperature, low temperature, high humidity, and low humidity to compare the material changes and strength attenuation of rubber, plastic, electronic products, and other materials before and after testing. This machine can also simulate the container environment to detect the fading and shrinkage of rubber and plastic under high temperature and humidity. This machine is specifically designed to test the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials. 408 liters |
| Technical Parameter | |
| model | DB-TH-S-408G.Z.D |
| inside dimensions | W×H×D ：600×850×800(mm) |
| temperature range | G: -20℃— +100℃（150℃） Z: -40℃— +100℃（150℃） D: -70℃— +100℃（150℃） |
| Humidity range | 20% RH —98% RH |
| Control stability | Temperature ± 0.5 ℃, humidity ± 2.0% |
| Uniformity of distribution | Temperature ± 2.0 ℃ Humidity ± 3.0% |
| heating rate | 3 ℃/min (approximately 25 minutes from -40 ℃ to 30 ℃) nonlinear no-load |
| cooling rate | 1 ℃/min (reduced from 30 ℃ to -40 ℃ for about 70 minutes) Nonlinear no-load |
| Temperature Limit | Zui high temperature+150 ℃ Zui low temperature -70 ℃ |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-