Small laboratory sewage treatment equipmentUPFS-III-500L can efficiently achieve the purpose of automatic dosing, automatic sterilization, and wastewater treatment. It has advanced technology, simple operation, and automatic process control. The treated wastewater can be directly discharged into the municipal sewage network.
Technical parameters
Size specifications (mm) | 1500x750x1850 |
Processing flow rate (m3/d) | 1.0 |
Noise (dB) | ≤65 |
Rated power (W) | 550×(1±5%) |
Chemical Oxygen Demand (CODcr) | ≦500 mg/L |
Biochemical Oxygen Demand BOD5 | ≦500 mg/L |
Suspended solids (SS) | ≦300 mg/L |
PH | 6-9 |
Faecal coliforms | ≦ 500MPN/L |
Intestinal pathogenic bacteria | not detectable |
Total residual chlorine | ≥ 0.5mg/L |
Note: The parameter data of the laboratory wastewater treatment device above is taken from the testing reports issued by qualified testing institutions. Due to the different water quality of the wastewater generated by each laboratory, the above data is for reference only and does not guarantee that the treated wastewater of each project will match the above data.
Standard configuration
Serial Number | name | Specification/Model | quantity |
1 | Laboratory wastewater treatment device | UPFS-III-500L | 1 unit |
2 | header tank | 500L | 1 piece |
3 | Liquid level sensor | KEY-5 | 1 piece |
4 | Polyvinyl chloride storage tank | 160×300×310mm | 4 of them |
5 | Processing pharmaceuticals | —— | 4 types |
6 | T-shaped filtration device | —— | 1 piece |
7 | Solid waste separator | —— | 1 piece |
8 | Plastic wrench | —— | 1 piece |
9 | Installation of auxiliary materials | —— | appropriate amount |
10 | fuse | 5 An | 2 pieces |
11 | operating manual | —— | 1 book |
12 | Operating procedures | —— | 1 copy |
13 | certificate of conformity | —— | 1 sheet |
14 | Quality inspection report | —— | 1 copy |
15 | Quality Assurance Card | —— | 1 sheet |
