use background

Environmental pollution is becoming increasingly serious, and environmental issues have been put on the agenda. Factory dust pollution is urgent. If the dust is not dealt with in a timely manner, it will not only affect the health of employees, but also be complained by surrounding residents. Those who are serious will be fined or shut down for rectification. The following picture shows the news report of citizens complaining about factory dust pollution. The environmental protection department conducted an on-site investigation and found that all the factories near the factory were polluted with white dust, causing significant impact. They were fined and required to rectify within a week. It is believed that most factories with dust emissions have such troubles. If there is a dust suction device, these problems can all be solved.

Product Introduction

The QY series high air volume industrial vacuum cleaner is specially developed by Claisen for dust collection. It is designed to suck dust generated in small industrial factories and has a good effect on dust, especially dust. Its characteristics are large suction aperture, high air volume, and large airflow, which can bring easily floating dust into the vacuum bucket without scattering, making it more effective than traditional vacuum cleaners.

Product images

detailed parameters

Power: 2000W, 3000W, 4000W three options to choose from

Voltage: 380V

Bucket capacity: 20L, 30L

Vacuum pressure: 11mbar, 15mbr

Vacuum suction caliber: 150mm, 220mm

Wire length: 8M

Noise: around 78DB

Size: 65 * 58 * 175cm 950 * 110 * 260cm

Weight: 75KG, 270KG, 300KG

Usage

1. Take itSmall industrial dust collection equipmentPlace it in a reasonable position and secure it in place.

2. Aim the vacuum cleaner at the area where dust is generated. If it is not suitable, a special vacuum cleaner can be customized.

3. Connect the power and turn on the switch to start vacuuming.

4. After finishing the work, open the door and clean the dust and garbage inside the vacuum cleaner.

5. When there is no need to suck dust, turn off the power, clean and store it.

Application location

Suitable for all factories, workshops, and other places where dust is generated, it can be used for dust collection and cleaning in the production processes of industries such as grinding, mixing, polishing, feeding, carving, and welding. The above are just examples, and we look forward to your discovery of more industry applications!

Maintenance

1. Be sure to clean the filter element and trash can after each use.

2. The power cord should be checked regularly, and if any damage is found, it should be replaced promptly to prevent leakage accidents.

3. Vacuum management should be kept unobstructed, without bending, and regularly checked for blockages or damages.

4. The filter element is a vulnerable part with a service life. Please replace it regularly according to the factory requirements and inspect it regularly. If any damage is found, replace it immediately to protect the motor.

5. When the equipment is not used for dust collection for a long time, hang the power cord on the equipment, clean the filter and dust bin, and store the equipment in a ventilated and dry place.

Customer Reviews

1. We have a feeding machine, and in the past, dust would float up every time we were feeding. We bought a regular dust specific vacuum cleaner, but it could only be cleaned after work was completed. We couldn't clean it while feeding, and the dust would still be everywhere. Especially since the employees had a big opinion on this, they would leave after only a few days. Hiring people is a headache. Since a friend introduced me to buy a Claisen small industrial dust suction equipment, this problem has greatly improved. Although there is still dust, it is less than one tenth of the original amount. The employees also expressed their happiness and finally solved one of my biggest pain problems!

2. I used it on a polishing machine, and I didn't understand it at the time. So I searched online, looking for it. Either it was wrong or it was a very large industrial dust equipment that cost hundreds of thousands of yuan as soon as I spoke, which scared me. Later, I found Claisen, whose sales were very professional and patiently asked me about the on-site situation, helped me choose the right type, and even came to my factory to see the site. They recommended me to buy this large-diameter dust suction equipment. This equipment is not big, about one person tall, like a small refrigerator with wheels that can be moved, suitable for small factories like mine. Its price is not expensive, and it solves the problem in less than ten thousand yuan. It has been used for more than three years now and has not been broken. It cleans garbage and other things. They are also very convenient, I really recommend them!

Dust Vacuum Cleaner Dust Vacuum EquipmentThis productSmall industrial dust collection equipment