overview
Multi functional power meters use advanced microprocessors and digital signal processing technology. Through direct AC sampling, they can measure electrical parameters such as current, voltage, active power, reactive power, power factor, frequency, active energy, and reactive energy. They can also be equipped with switch input output, analog transmission output, power pulse output, and RS485 network communication functions. As an advanced intelligent and digital front-end acquisition component for power grids, this instrument is widely used in various control systems, industrial automation, intelligent buildings, intelligent distribution panels, and switch boxes. It has the characteristics of easy installation, simple wiring, easy maintenance, small engineering quantity, and programmable input parameters on site. Capable of networking different PLCs and industrial control computer communication software in the industry.
TECHNICAL INDEX

transport enter measure measure apparent show	electricity press	RATING	AC100V, 400V (please specify when ordering)
		overload	Duration: 1.2 times Instantaneous: 2 times/10 seconds
		power consumption	＜ 1VA (per phase)
		impedance	＞500KΩ
		accuracy	RMS measurement, accuracy level 0.5
	electricity flow	RATING	AC 1A, 5A (please specify when ordering)
		overload	Duration: 1.2 times Instantaneous: 10 times/10 seconds
		power consumption	＜ 0.4VA (per phase)
		impedance	＜2MΩ
		accuracy	RMS measurement, accuracy level 0.5
	frequency		45-55Hz、 Precision 0.01 Hz
	power		Total harmonic content of voltage and current (2-31st harmonic content)
	electric energy		Positive and negative active and reactive energy measurement
	display		Programmable, switchable, looping (LED/LCD) display
	Electric energy display range		0.01-KWh (or KVar)
power supply	scope of work		AC/DC 80-270V special requirements can be customized
	power consumption		＜5VA
input	Switching input		4-channel switch input, remote dry contact mode (optional)
output	Digital Interface		RS-485, MODBUS-RTU protocol (optional)
	Switching Output		4-channel switch output, relay passive contact mode (optional)
	analog output		4-channel analog transmission output, 4-20mA/0-20mA/4-12-20mA/0-5V/1-5V (optional)
environment	work environment		-10-55 ℃, relative humidity<85%. Non corrosive gas environment, altitude<2000m
	Environment		-55-85 ℃, relative humidity<85%
secure	pressure resistance		Input/power>2KV, input/output>2KV, power/output>1KV
	isolation		Input, output, and power supply to the chassis>100M Ω

List of models and functions of single-phase multifunctional power meters

model	measure		display	Appearance and installation dimensions							Peripheral functions (optional, to be specified when ordering)
				A	B	C		D	E		digital communication	Switch Module		Transmission output
HL-42K1E	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LED	120	120	83		112	112		RS-485 MODBUS -RTU	4-way entry Route 4 departs 4DI/4DO		4-channel transmission 4-20mA 0-20mA 4-12-20mA 0-5V 1-5V (Optional)
HL-42K1EY	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LCD	120	120	83		112	112
HL-96K1E	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LED	98	98	83		90	90		RS-485 MODBUS -RTU	4-way entry Route 4 departs 4DI/4DO		4-channel transmission 4-20mA 0-20mA 4-12-20mA 0-5V 1-5V (Optional)
HL-96K1EY	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LCD	98	98	83		90	90
HL-80K1E	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LED	84	84	83		76	76		RS-485 MODBUS -RTU	2-channel switch Quantity output		4-channel transmission 4-20mA 0-20mA 4-12-20mA 0-5V 1-5V (Optional)
HL-80K1EY	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LCD	84	84	83		76	76
HL-72K1E	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LED	75	75	90		67	67		RS-485 MODBUS -RTU	2-channel switch Quantity output		4-channel transmission 4-20mA 0-20mA 4-12-20mA 0-5V 1-5V (Optional)
HL-72K1EY	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LCD	75	75	90		67	67
HL-45K1E	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LED	50	50	83		45	45		RS-485 Or 2-channel transmission output	Route 2 departs 2DO		RS-485 Or 2-channel transmission output
HL-45K1EY	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LCD	50	50	83		45	45
HL-48K1E	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LED	51	99	83		91	45			Route 2 departs 2DO		RS-485 Or 2-channel transmission output
HL-48K1EY	U、I、KW、KVar、KWh、 KVarh、Hz、cosφ		LCD	51	99	91		45	45

Wiring example diagram

Note: 1 "★" is the current input terminal. Please refer to the product's random wiring diagram for specific wiring methods and parameters.
Order List
When placing an order, please specify in detail the required model, input signal ratio, and expansion function module.
Example 1: Model: HL-42K1E
Power supply: AC220V
Input: 10KV/100V, 200A/5A
Communication: RS485/MODBUA-RTU
Function extension: 4DI/4DO
Quantity: 88 units