measuring principle

The principle of measuring conductivity is to measure it in parallel and at a fixed distance from each otherLTwo electrode plates (or cylindrical electrodes) are placed in the solution being tested, and a certain potential is applied to both ends of the plates (usually a sine wave voltage, frequency) to avoid solution electrolysis1～3 kHz）. Then measure the conductivity between the plates using a conductivity tester.

characteristic

4896 microcomputer designed conductivity/resistivity controller Large LCD display screen with operation status and special signal display A set of NO/OFF outputs, high/low point selection, hysteresis with arbitrary program settings Program setting switches range and accepts two-level and four level electrode inputs Combination keys enter the setting and calibration mode design to prevent erroneous changes

application

Widely used in RO, pure water, ultrapure water, circulating water, boiler water and other systems, as well as in process fields such as electronics, electroplating, printing and dyeing, chemistry, food, pharmaceuticals, etc.

specifications

Shangtai Online Conductivity/Four major components for resistivity matching

SUNTEXOnline conductivity/Installation diagram of resistivity electrode testing system

The products for detecting water quality include not only Shangtai's EC-430 for detecting conductivity/resistivity EC-410， There is also an Italian conductivity meterMagnetic C7685、CL7635 dissolved oxygen controllerWait, wait,They are all good choices for you, welcome to purchase!