SS-ABC series three-layer co extrusion composite film blowing machine-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13566166060
Address

No. 2, Building 2, Jingye Road, Dongshan Economic Development Zone, Rui'an City, Zhejiang Province

Contact Now

SS-ABC series three-layer co extrusion composite film blowing machine

Contact Supplier

More Products

Product details

1By using two extruders to plasticize and extrude two identical or different materials into a co extrusion composite head, a composite film of the same model is produced through co extrusion, greatly improving the physical properties of the film, increasing its strength, and making the film have good barrier and air tightness.

2Adopting advanced continuous rotating machine heads, the products are smooth and uniform, ensuring the quality requirements of subsequent process equipment such as packaging machines and printing machines for films. It is suitable for producing composite pearl films, composite liquid packaging films, insulation films, multifunctional agricultural films, etc. Its application scope is gradually expanding and it is the direction of plastic product development.

Applicable raw materials:LDPE、HDPE、LLDPE

usage method:

1. Check that the temperature self-control is intact, the heating appliances are intact, and pay attention to timely adjusting the heating temperature at each point within the specified range.

2. Check the traction speed and control the film thickness.

Observe and adjust the uniformity of the film thickness, and ensure that the bending diameter meets the standard.

4. Check the pressure of the air storage cylinder, it should not be too high, but there should be a backup pressure.

5. Check and control the proportion of raw materials and mix them evenly.

⒍ Check for impurities in the raw materials, especially by promptly using a magnet to check for any iron mixed in.

7. Check the lubrication condition of the gearbox position and air compressor cylinder lubricating oil.

Regularly check the temperature rise and mechanical transmission of each operating motor.

Main technical parameters:

model	SS-3L600	SS-3L800	SS-3L1000
Screw diameter	Φ40/45/40mm	Φ45/50/45mm	Φ50/55/50mm
Draw Ratio of Screw	30:1	30:1	30:1
screw speed	10—90rpm	10—90rpm	10—90rpm
Main motor power	11KW/15KW/15KW	15KW/18.5KW/15KW	18.5KW/22KW/18.5KW
Maximum extrusion capacity	50-80kg/h	80-140kg/h	80-180kg/h
Mold specifications	Φ120mm	Φ180mm	Φ220mm
Film thickness single-sided	0.01—0.12mm	0.01—0.12mm	0.01—0.12mm
Maximum bending diameter of thin film	100-600mm	100-800mm	100-1000mm
machine weight	3t	4t	5t
External dimensions	620024005800mm	640026006200mm	660028006200mm

model	SS-3L1200	SS-3L1500	SS-3L2000
Screw diameter	Φ55/60/55mm	Φ60/65/60mm	Φ65/70/65mm
Draw Ratio of Screw	30:1	30:1	30:1
screw speed	10—90rpm	10—90rpm	10—90rpm
Main motor power	18.5KW/22KW/18.5KW	22KW/30KW/22KW	30KW/37KW30KW
Maximum extrusion capacity	110-200kg/h	150-250kg/h	160-280kg/h
Mold specifications	Φ250mm	Φ400mm	Φ500mm
Film thickness single-sided	0.01—0.12mm	0.01—0.12mm	0.01—0.12mm
Maximum bending diameter of thin film	500-1200mm	500-1500mm	1000-2000mm
machine weight	7t	9t	15t
External dimensions	680030006500mm	750036007500mm	900048008500mm

model	SS-3L2500	SS-3L3000
Screw diameter	Φ80/80/80mm	Φ90/90/90mm
Draw Ratio of Screw	30:1	30:1
screw speed	10—90rpm	10—90rpm
Main motor power	37KW/37KW/37KW	55KW/55KW/55KW
Maximum extrusion capacity	250-280kg/h	80-90kg/h
Mold specifications	Φ600mm	Φ800mm
Film thickness single-sided	0.01—0.12mm	0.01--.12mm
Maximum bending diameter of thin film	1500-2500mm	100-800mm
machine weight	20t	25t
External dimensions	9500530011000mm	10000580011800mm

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content