Installation and ordering
This filler can be installed and used in conjunction with various shapes of brackets. When placing an order, please specify the type of filler, diameter ф mm, spacing, effective length, and required quantity in m3.

purpose
The elastic three-dimensional filler material is selected from a high-quality plastic and polyamide variety that is resistant to corrosion, high temperature, and aging from polyolefin hydrocarbons And add heat-resistant, hydrophilic, stabilizing, adsorption and other additives, use specialized equipment, and feed according to strict ratios for re mixing and copolymerization Through high-temperature melting, special processes such as wire drawing, wire strand production, and corrugated pressing are carried out to process various types of wire strands that have both certain rigidity and flexibility, as well as good rebound performance. Then, using special processes, the wire strands are inserted and fixed on a corrosion-resistant, wear-resistant, and high-strength central rope. The wire strands are arranged in a three-dimensional and uniform radiation state, forming a single unit of suspended elastic three-dimensional packing.

characteristic
This product has a large specific surface area, variable pores, and is made of a lighter material than water Can spread evenly in water Multi layer dense cutting of bubbles improves the transfer coefficient of dissolved oxygen. Due to the special structure of the silk thread, the specific surface area after membrane formation is doubled, and membrane formation and detachment are easy, resulting in strong biofilm activity. It can be widely applied to various types of sewage treatment and micro pollution treatment of tap water raw water. This product has won national level honors multiple times Quite susceptible to floating.

Ordering Instructions
This filler can be arranged in a parallel or plum blossom pattern according to the water quality concentration and effluent requirements. Before installation, soak the filler in warm water at 70 ℃ -90 ℃ for a moment to restore the silk strip to its natural and straight state, and then hang it. The filler should be stored indoors to avoid high temperatures and direct sunlight, so as not to affect the recovery and service life of the product. When ordering this product, it is necessary to specify the ф MM and effective length (m) of the filling unit, as the manufacturing process of this product is special Therefore, it is advisable to place an order as early as possible when placing an order.