Product Features

1. The crushing chamber is water droplet shaped, effectively eliminating the circulation phenomenon during the crushing process and achieving high output;
2. A U-shaped secondary crushing mechanism is installed at the bottom of the crushing chamber to further increase production and achieve more uniform particle size;
3. The rotor has undergone precise dynamic balance verification, resulting in low equipment noise and smooth operation;
4. By adjusting the clearance between the hammer and sieve, coarse or fine crushing can be achieved, achieving dual use of one machine;
5. The new snake shaped coupling direct transmission has a large compensation displacement and effectively avoids bearing heating phenomenon;
6. Hammer plates for vacuum welding of hard alloys;
7. Imported components are used for key parts, with long service life and low cost;
8. Fully open operation door, convenient for maintenance and replacement of screening plates;
9. Widely used in various feed factories, oil factories, alcohol factories, citric acid factories, etc.

Main technical and performance parameters

Note: The above indicators are those that meet the following conditions: the raw material is corn, the moisture content is not more than 14%, the capacity is not less than 0.72t/m3, the diameter of the crusher screen plate is ￠ 3mm, and the opening rate is not less than 33%.

Features：

1. The grinding chamber is of tear circle shape, effectively eliminating the circular flow in the grinding process and getting higher capacity;
2. The bottom of grinding chamber is fitted with U-shape double grinding structure, further improving the capacity with evener particle size;
3. All of our rotors pass an accurate dynamic balancing test, resulting in low noise and smooth running.

4. Both coarse and fine grinding can be completed by adjusting the distance between the beater and the screen;
5. New type S-shape coupling directly connecting driving results in big offset travel and effectively avoid the heat from the bearing;
6. Beater blade edge is vacuum-welded by special alloy steel, resulting in long service life;
7. The imported components are used for key parts, resulting in long service life and low maintenance cost;
8. The moving full-wide operation door facilitates maintenance and replacing of beater;
9. It is widely used in various feed mills, oil plants, alcohol plants, citric acid plants, etc.

Main Technical Parameters：

Re: The above indexes are those when meeting the following conditions: raw material: corn, moisture content not higher than 14%, density not lower than 0.72t/m3, screen: hole diameter ￠3mm, hole-opening rate not less than 33%.