Resistance rotary level switch HL-400

Product description

HL-400 resistive rotary level switch is a compact basic type, also an ultra small level switch, and an economical level meter.

HL-400 is the standard type used as a standard, and can be widely used for upper or lower limit types in small feeding hoppers.

Please choose the L size from 85mm, 100mm, or 135mm.

Note: 1 HL-400 can replace Kansai Automation level switch in Japan - model: LS;

2. HL-400 can replace the NOHKEN level switch from Japan Energy Research Institute - Model: R7-X

Product Features:

1. Special material level switch for small hopper of injection molding machine;

2. Ultra small blade type material level switch;

3. Suitable for level detection in small silo containers;

4. The lineup is complete and can meet various purposes.

Features and specifications

HL-400 Outline Drawing:

Wiring method:

1Resistance rotary level switchBefore installation, please confirm whether the power supply voltage is consistent with the voltage indicated on the label.

2. Installation at the feed inlet should be avoided. When unavoidable, protective barriers can be installed to protect the blades from material impact.

3. Confirm whether to install horizontally or vertically before installation.

4. When installed horizontally, the inlet of the junction box should be facing downwards vertically, and the cable fixing nut must be locked tightly. If possible, a rain cover can be added.

5. When installed horizontally, the blades should be installed at an angle of 10-20 degrees downwards to reduce material impact.