overview

RS pump series single-stage, dual service Horizontal open horizontal heating network circulating centrifugal pump, widely used in metallurgy, power plants, and chemical industry Heating systems, etc., are used to transport clean water or physical materials that do not contain solid particles Other liquids with chemical properties similar to water, with a temperature range of -250 ℃ to 150 ℃ for the medium being transported The allowable import pressure is 0.8MPa

Parameter range

Traffic: Q 400-440m³/h

Disclaimer: H21-148m

Model Description

500RS100

500- indicates a suction port diameter of 500mm

RS stands for single-stage, dual service, open type centrifugal hot water gathering

The design head of the 100 pump is 100m at room temperature

structural style

The RS type hot water circulation pump is installed horizontally, with the suction and discharge ports located below the pump centerline and perpendicular to the pump shaft. The RS type hot water circulation pump body has a pump cover horizontally separated along the center of the pump shaft. During maintenance, there is no need to disassemble the inlet and outlet pipelines and motors. Simply remove the coupling connecting bolts and pump cover to remove the rotor components for repair. Very convenient. The shaft end seal can be either a packing seal or a mechanical peak checking (single end non-equilibrium type). Users can choose their own shaft seal sealing method.

Rotation direction

From the motor end, the pump rotates counterclockwise, with the suction port on the left and the discharge port on the right. The RS type hot water circulation pump can also be designed to rotate clockwise, with the suction port on the right. Spit out on the left.

Material of parts

The material of the overcurrent components of the AS type hot water circulation pump is ductile iron, and the material of the shaft is 45 steel.