Purchase can be madefreeProvide training

Three major advantages of Jie'er machine: 1. Free trial

2.Warranty for 3 years（Complete machine for 1 year, cylinder for 2 years）

3 . Pneumatic components Japan SMC, electric components Japan (Panasic)

Maintenance of transfer printing machine

In order to ensure the normal operation of the solenoid valve and extend its service life, attention should be paid to the following during operation and maintenance:

1、 Air compression components:

1. Do not use too much moisture and impurities into the air pressure system to avoid malfunctions and reduce its service life.

2. Keep compressed air dry and clean.

3. Drain the moisture inside the air compressor once a day.

2、 Three point combination

1. Maintain air pressure within 7pa.

2. Drain the water from the filter cup at least once a day.

3. Check if the lubricating oil is fully filled.

4. When the manual discharge valve is not used for a long time, it should be pushed to the back end.

3、 Lubrication

1. Air oil combination: requires specified lubricating oil.

2. Lubrication of bearings: various types of butter.

4、 Other

1. When the machine stops working or needs to be moved or repaired, the power and gas sources must be cut off.

2. The speed control valve is a precision component, and it is recommended to avoid collision damage as much as possible.

3. When adjusting or cleaning the oil cup, follow the steps.

4. Enhance fire prevention awareness and equip with firefighting equipment.