Prime BSI Express Scientific CMOS (sCMOS) optimizes integrationCompact platform designThrough optimized pixel design, USB 3.2 Gen 2 connectivity, and nearly perfect95% quantum efficiencyAchieving a perfect balance between high-resolution imaging and sensitivityTo maximize signal detection.
1. Ultra high sensitivity: Prime BSI Express uses the same back illuminated chip as Prime BSI, continuing all its advantages: quantum efficiency can reach 95%, which is higher sensitivity than 82% front illuminated sCMOS cameras; In CMS mode (43fps), the readout noise is only 1.0e -, and the imaging signal-to-noise ratio is high. Therefore, it is the best choice for low light high-speed imaging.
2. USB interface: Prime BSI Express uses USB 3.2 Gen 2 interface, supports Windows and Linux systems, and is easy to integrate. Under 11 bits, the full frame speed can reach 95fps, which is faster than Prime BSI and can meet higher imaging requirements.
3. Compact bodyAs a product specially designed for instrument production and integration, the overall size of Prime BSI Express is 78mm x 78mm x 92mm, which is more compact and easy to integrate into most imaging devices.
4. Programmable scan mode: Prime BSI Express also has a built-in Programmable scan mode, which allows you to set parameters such as exposure line count, delay time, scanning direction, etc., perfectly synchronizing camera exposure with scanning light, suitable for light imaging.
Main parameters】
Chip: Gpixel GSENSE2020BSI Scientific CMOS Sensor (same as Prime BSI)
Resolution: 2048 x 20484.2 million pixels
Quantum efficiency: 95%
Pixel: 6.5 µ m x 6.5 µ m, diagonal 18.8 mm
Noise: 1.0e
Interface: USB 3.2 Gen 2 interface, USB diagnostic port, used for remote troubleshooting
Body size: 78mm x 78mm x 92mm Compact
Related Instruments
Click here to view ☞:Prime 95B research grade sCMOS camera
Click here to view ☞:Kinetix ultra high speed wide field backlit sCMOS
Click here to view ☞:IRIS 9 Scientific CMOS (sCMOS) High Resolution Camera
Click here to view ☞:Iris 15 CMOS (sCMOS) High Resolution Large Field Imaging Camera
[Specification Parameters]
Specification parameters |
Camera performance |
|
sensor |
Gpixel GSENSE2020BSI Scientific CMOS sensor |
|
Maximum Resolution |
2048 x 2048 (4.2 Megapixel) |
|
pixel size |
6.5μm x 6.5μm (42.25μm2) |
|
Sensor field |
13.3mm x 13.3mm, 18.8mm diagonal |
|
QE% |
>95% |
|
Readout Noise |
Correlated Multi-Sampling (CMS) |
1.0 e- (Median) 1.1e- (RMS) |
Combined/High Gain |
1.6e- (Median) 1.8e- (RMS) |
|
Manjing |
45,000e- (Combined Gain) 10,000e- (High Gain) 1,000e- (CMS) |
|
dynamic range |
25,000:1 (Combined Gain) |
|
depth |
16-bit (Combined Gain) 12-bit (CMS) 11-bit (High Gain) |
|
read mode |
Rolling Shutter, Effective Global Shutter, Programmable Scan Mode |
|
Binning |
2x2 (on FPGA) |