Split prepaid IC card water meter features:

Intelligent water meters are installed in outdoor trenches and water meter wells. First, the environment in the trenches is bad, wet, water accumulated in rainstorm in summer, and freezing in winter; Secondly, it is inconvenient for users to swipe their cards. In this case, our company has developed a split type prepaid water meter, where the base meter is located in the underground well or trench, and the swipe card is located in the above ground control box. This not only reduces the repair rate of the water meter, improves operational stability, but also facilitates card swiping. This watch is particularly popular among water management departments in rural areas and places where card swiping is inconvenient.

Features:

1. Prepaid function: Water usage information is transmitted bidirectionally through an IC card, with water purchased first and then used, and automatically shut down and stopped without any fees.

2. It consists of three parts: card swiping controller, data cable, and valve control meter. The connection between the card swiping controller and the valve control meter can reach up to 20 meters.

3. One card function: This meter supports multiple meters on one card and can realize one card for electricity, gas, cold, and hot water meters.

4. Display function: Display the current water purchase amount, remaining water amount, cumulative water consumption, on/off valve status, low battery reminder, etc.

5. Low battery alarm function: When the battery power is insufficient or the battery is replaced, the water meter will automatically shut down.

6. Ultra low power LCD display function.

7. Fully sealed design, with an environmental rating of IP68 protection requirement.

8. The stainless steel electric ball valve adopts a two-way trip design, which combines tightness and flexibility to ensure reliable switching.

9. Pollution prevention and rust prevention function: The water meter switches on and off the valve every half month, and the valve automatically discharges to avoid scaling, rusting, and other phenomena.

10. Anti attack function: When the water meter is subjected to a strong magnetic attack, the valve of the water meter will automatically close, and the valve can only be opened after external interference is eliminated.

11. Hoarding limited function: Limited recharge limit, exceeding the limit cannot purchase water.

12. When the remaining water level reaches the alarm value, the water meter automatically closes the valve, and the user can continue to use it after swiping the card until the water level reaches zero.

13. Three proof function: fully sealed design, truly achieving waterproof, leak proof, and attack proof.