SAT-NLS plastic frame nylon sieve

Product Usage:

Pre treatment screening sample for soil heavy metal analysis

Specification and model:

This plastic sieve has a diameter of 200MM and a height of 50MM, with commonly used specifications of 10-200 mesh

Corresponding size of standard sieve mesh:

The so-called mesh refers to the particle size or fineness of the material. The general definition refers to a sieve with an area of 1 inch by 1 inch, through which materials can pass, and the number of holes in the sieve is defined as the mesh size. If the mesh size is 200, it means that the material can pass through a sieve with 200 mesh holes within 1 inch * 1 inch. Similarly, the larger the mesh size, the finer the particle size of the material; The smaller the mesh size, the larger the particle size of the material. Sieve size refers to the size of the sieve holes that particles can pass through, expressed as the number of sieve holes in a screen with a width of 1 inch (25.4mm), hence it is called mesh size. The specifications of standard sieves vary from country to country, and the commonly used Taylor system uses the number of holes per inch length as the sieve number, known as mesh. For example, a 100 mesh sieve means there are 100 sieve holes per inch of the sieve mesh.

Soil sieve (standard set)

Sand and stone sieve (standard set)

Stone sieve (standard set)