PicoFlow - Continuous Flow Measurement at Low Gas Solid Ratio

Application:

PicoFlowIt is specifically developed for measuring the flow rate of powders transported on pipelines at ultra-low concentrations.

l Measure the flow rate of ultra-low concentration solid particles

PicoFlowApplied to the following working conditions:

Under pneumatic conveying conditions, the maximum material conveying flow rate can reach100kg/h(depending on the actual application).

• Free fall conditions,

When the dust measurement equipment is unable to handle or exceeds the measurement range of the flow measurement equipment

Product information:

1 system composition

A complete measurement system includes the following components:

• Sensor base

• Sensors

•PME100converter

2、 signal output

standard4-20mAOutput, load<500Ω

Relay250AC，1A

3、 Installation and Examples

PicoFlowCan be installed in both metal and non-metal pipelines. After determining the installation position, drill a hole on the inner wall of the conduit and weld the sensor base vertically onto the official road. Then screw the sensor probe into the bottom.