With the development of industry and fisheries, water pollution has become increasingly severe, and aquaculture density is gradually increasing. The areas available for aquaculture are becoming fewer and fewer. The breeding pedal has the advantages of low investment, high yield, maneuverability, and quick results, and is one of the effective means to solve the above problems, with a wide range of application prospects.

Our company has designed, developed, and produced a new type of PE plastic ocean anti-skid pedal production line in response to the development of the times. This is an automatic production line that integrates feeding, extrusion, continuous roll forming, and automatic length counting and cutting into one plastic extrusion production line.PE plastic ocean anti-skid pedalproduction equipmentThe structure of screws and barrels varies depending on the properties of the processed materials. Each extrusion device should be equipped with an automatically controlled quantitative feeding hopper to effectively control the feeding amount.PE plastic ocean anti-skid pedal production equipmentThe adaptability and combination of extruders ensure the quality of co extruded hollow plasticsThe premise of quantity.

However, the current problem is that the existing design of aquaculture fish raft pedals is unreasonable, with some using solid structures that increase the weight of the pedals and place higher demands on the floating body; Some use hollow structures to reduce the weight of the pedal, but it will also lower the strength of the pedal and affect the normal operation of the staff. So our company has developed a new typeThe pedal production line is equipped with a hollow chamber inside the pedals produced by the production line. The hollow chamber is divided into multiple independent chambers of different sizes by partitions according to the force situation of different parts of the pedal. Among them, the independent chamber space corresponding to the parts with high pedal force is small, and the independent chamber space corresponding to the parts with low pedal force is large. The hollow chamber is set along the length direction of the pedal and runs through the entire pedal. The upper surface of the pedal has multiple anti slip fixing grooves evenly distributed along the length direction.