Milton Roy LMI electromagnetic metering pumpBrief introduction:

Electromagnetic drive
Flow rate: 0-95 l/h
compare
High pressure: 70 bar
Adjustable stroke speed and stroke length
Manual/automatic control mode
programmable controller

Main series: P.A, B.C. E

*Y-pump head code, please refer to the selection table for detailed selection

*Y-pump head code, please refer to the selection table for detailed selection
*Y-pump head code, please refer to the selection table for detailed selection

Technical parameters of Milton Roy LMI electromagnetic metering pump:

LMI electromagnetic metering pumps have 7 series including P, A, B, C, E, H, J5, etc. Users can adjust based on traffic, pressure, explosion-proof

Corresponding series of metering pumps shall be selected for power supply, self-control and other requirements.

control mode

9-Programmable high-precision microprocessor control, with LCD display and four touch screen keys, receiving external 4-20mA signals

(Programmable) or pulse signal (passive reed switch, transistor or optocoupler contact) control. Can multiply input pulses

Or division operation and batch accumulation. Manual/automatic mode is optional. Supporting the use of Digi Pulse flow monitor for convection

Perform alarm monitoring for quantity.

7- Receive external pulse signals (passive reed switch, transistor or optocoupler contacts) for control. Manual/automatic mode is optional. same

The MP series control module can receive 4-20mA control signals or perform multiplication/division operations on received pulse signals.

1. Manually adjust the stroke length and stroke frequency (manual dual adjustment). Frequency adjustable range: P12 □, P13 □ 0~60spm

The rest are 0~100spm 0- fixed stroke frequency, manually adjust stroke length.

FEATURES

Overpressure automatic protection, no safety valve required.

Wide flow regulation range, up to 1000:1

• Easy for external automatic control, directly responding to external 4-20mA signals and pulse control signals.

• Simple is Best principle for moving parts, no need for lubrication, no rotation

• And transmission components, high reliability.

Modular structure, components are easy to replace and do not require welding.

Fully sealed casing, IP65 protection level, made of fiberglass reinforced PP material.

Low power consumption, adaptable to 25~66Hz power supply.

• Available with direct power supply option (battery powered).

For the capacity series, please refer to the pump selection table of each series

The power plug

1-----120VAC

2-240VAC, USA plug

3-220VAC, DIN plug

5-240VAC UK plug