NitraVisCarbovis NiCaVis
(200-750nm full spectrum scan)
CarboVis 700/5 IQ: COD/BOD/TOC/DOC/SAC sensors
CarboVis 700/5 IQTS: COD/BOD/TOC/DOC/SAC/suspended solids sensor
CarboVis 700/1 IQ: COD/BOD/TOC/DOC/SAC sensors
CarboVis 700/1 IQTS: COD/BOD/TOC/DOC/SAC/suspended solids sensor
Nicavis 700/5 IQ: COD/BOD/TOC/DOC/SAC/nitrate nitrogen sensor
Real time online continuous monitoring of NO3, COD, TOC, DOC, BOD, SAC
characteristic:
On site continuous monitoring sensor technology
Quick response, no lag time
Accurate testing
Effective interference suppression technology
Automatic air blowing system
Adopting advanced spectral analysis techniques, directly testing in the medium
A set of precise spectral analysis components is contained within a sensor with a diameter of 40mm, which can accurately analyze the component concentrations (such as nitrate, COD/BOD/DOC) of the tested water sample in the UV visible band. Paired with the advanced online multi parameter monitoring system IQSensorNet that uses digital communication, it can simultaneously monitor the concentrations of multiple components, such as pH, dissolved oxygen, conductivity, turbidity, suspended solids concentration, and ammonia nitrogen concentration.
The sensor is directly immersed in the water sample to be tested, without the need for sample transportation and pretreatment
Fast response, truly real-time continuous monitoring
Precision optical components, accurately tested in the UV visible wavelength range
Adopting advanced spectral analysis techniques to suppress interference from the surrounding environment and turbidity can achieve better results than ordinary dual beam testing techniques
Automatic air blowing can greatly extend the continuous operation time of the system and is almost maintenance free
By using photometric testing, a significant amount of reagent consumption has been saved
Introduction to IQ SENSOR NET System Host:
Multiple output information options available, such as RS485, MODBUS, PROFIBUS, or 0/4-20mA analog current output
Detailed introduction:http://www.lawlink.cn/produceDetail.aspx?ID=7
◆ Up to 20 sensors can be connected, which is suitable for occasions with many test points. The distributed network system has advanced technology and excellent performance. The display terminal is mobile and supports hot plug
Multiple output signal modules are available for selection, such as RS485, MODBUS, PROFIBUS, or 0/4-20mA analog current output